Andy, That did not do it. It says in the help files something about a DDE file. I will check on that and see if I can find it.
Joe ----- Original Message ----- From: Andrew O'Brien To: [email protected] Sent: Tuesday, December 12, 2006 8:49 PM Subject: [digitalradio] Re: PTT via Commander I have it working for PTT but I am confused about a couple of factors. Set Commander for your desired comm port, test the PTT via Commander ("config" then the "general" tab and select TX in the PTT area.) That should work fairly easily. Then boot up Multipsk and go to the config area and select "serial port" . This is where I get confused. In my settings (using a USB interface with virtual serial ports, the Microkeyer), there is a check mark next to "none" in the Multipsk serial port area. It works just fine, but is set to none. Other people I have helped claim that "none" does no work for them but it has worked when they select another PTT port in Multipsk. Andy K3UK , o--- In [email protected], "Joe Ivey" <[EMAIL PROTECTED]> wrote: > > Can someone tell me how to set up MultiPSK to activate the PTT via Commander? > Thanks in advance. > > > Joe Ivey > W4JSI > > Light travels faster than sound. > This is why some people appear bright Until you hear them speak. >
