On Mon, Jan 4, 2010 at 6:10 PM, graham787 <[email protected]> wrote: > > > HRD will communicate FLDIGI and WSPR will 'not' via same port > (not at the same time of course) > Odd problem has occured .... using a USB to Serial cable for the FT-897-D > HRD will communicate normally and control the rig .. > Same thing happened to me when I reassigned a "used" port number to a USB virtual serial port. The rig could use the port but the rotor could not. I had to clean out all the virtual serial ports in the registry and start over.
Wes, WZ7I > > BUT > > Fldigi and Wspr .. now will not communicate ..all the settings look the > same ... Fldigi will address a second usb/serial cable alocated com-4 to > operate the ptt .. as will other progs > WSPR as dose Fldigi reports cannot communicate > > Close then down .. open HRD and the link works normaly .. same cable .. > same settings .. > > All progs used to work with the serial cable ... and ideas ? dose HRD have > some form of auto baud routine thats masking some setting ?? > > tnx - G . > > >
