Rudy, I pressed the SEND button too soon....from the list you kindly posted will this cable.... SLCAB8R ...be the correct one for the connection from the Signalink to the Yaesus 8 pin mike socket? Regards again Jon
--- In [email protected], "jon_g4fut" <jon_g4...@...> wrote: > > Thanks Rudy, > Yes, I am very happy with Signalink, I use one with my ICOM 718 for data so wish to move onto 6 metres now > Regards > Jon > > > --- In [email protected], "Rudy Benner" benner@ wrote: > > > > Part Numbers & Options: > > SignaLink USB Part Numbers (please specify when ordering): > > > > a.. SLUSB4R - For 4-Pin Round Mic Connector > > b.. SLUSB8R - For 8-Pin Round Mic Connector > > c.. SLUSBRJ1 - For RJ-11 Mic Connector > > d.. SLUSBRJ4 - For RJ-45 Mic Connector > > > > e.. SLUSB5PD - For 5-pin DIN Data / Accessory Port Connector > > f.. SLUSB8PD - For 8-pin DIN Data / Accessory Port Connector > > g.. SLUSB13I - For ICOM 13-pin DIN Accessory Port Connector > > h.. SLUSB13K - For Kenwood 13-pin DIN Accessory Port Connector > > i.. SLUSB6PM - For 6-pin mini DIN Data / Accessory Port Connector > > j.. SLUSBK3 - For the Elecraft K3's rear panel Audio In/Out & PTT jacks > > > > k.. SLUSBNC - Un-terminated cable (bare wires on radio end) for building your own cable > > Extra Radio Cables: > > > > a.. SLCAB4R - For 4-Pin Round Mic Connector > > b.. SLCAB8R - For 8-Pin Round Mic Connector > > c.. SLCABRJ1 - For RJ-11 Mic Connector > > d.. SLCABRJ4 - For RJ-45 Mic Connector > > > > e.. SLCAB5PD - For 5-Pin DIN Data / Accessory Port Connector > > f.. SLCAB8PD - For 8-Pin DIN Data / Accessory Port Connector > > g.. SLCAB13I - For ICOM 13-Pin DIN Accessory Port Connector > > h.. SLCAB13K - For Kenwood 13-Pin DIN Accessory Port Connector > > i.. SLCAB6PM - For 6-Pin mini DIN Data / Accessory Port Connector > > j.. SLCABK3 - For the Elecraft K3's rear panel Audio In/Out & PTT jacks > > > > k.. SLCABNC - Un-terminated cable (bare wires on radio end) for building your own cable > > Accessories: > > > > a.. Plug & Play Jumper Modules - Click here for part numbers and radios supported > > b.. SLHEAD - SignaLink Programming Header for wiring your own jumper module > > The instructions will include details on the jumpers. You will need a cable to go from the Signalink USB to the headphone jack also. > > > > I own 2 Signalink USB s and am very happy with them. > > > > > > From: jon_g4fut > > Sent: Tuesday, July 20, 2010 12:44 PM > > To: [email protected] > > Subject: [digitalradio] Yaesu FT-690 > > > > > > > > Does anyone use the FT 690 for 50Mhz digital? Especially with the Signalink. If so I'd like to know the equipment number of the connecting serial cable which attaches both these units. > > Jon G4FUT > > > > > > > > > > > > > > ------------------------------------------------------------------------\ -------- > > > > > > > > No virus found in this incoming message. > > Checked by AVG - www.avg.com > > Version: 9.0.839 / Virus Database: 271.1.1/3017 - Release Date: 07/20/10 02:36:00 > > >
