Well, I think that is correct, but I seem to be getting my butt kicked all day, so I decided to send you enough data to figure it out and come out smelling rosy for a change. I think I get the Bonehead Award today. Don't forget that you will need a cable for the receive, that part is easy.
If you are going to kick me, please take a number and line up. No pushing. From: jon_g4fut Sent: Tuesday, July 20, 2010 1:45 PM To: [email protected] Subject: [digitalradio] Re: Yaesu FT-690 Rudy, I pressed the SEND button too soon....from the list you kindly posted will this cable.... SLCAB8R ...be the correct one for the connection from the Signalink to the Yaesus 8 pin mike socket? Regards again Jon --- In [email protected], "jon_g4fut" <jon_g4...@...> wrote: > > Thanks Rudy, > Yes, I am very happy with Signalink, I use one with my ICOM 718 for data so > wish to move onto 6 metres now > Regards > Jon > > > --- In [email protected], "Rudy Benner" benner@ wrote: > > > > Part Numbers & Options: > > SignaLink USB Part Numbers (please specify when ordering): > > > > a.. SLUSB4R - For 4-Pin Round Mic Connector > > b.. SLUSB8R - For 8-Pin Round Mic Connector > > c.. SLUSBRJ1 - For RJ-11 Mic Connector > > d.. SLUSBRJ4 - For RJ-45 Mic Connector > > > > e.. SLUSB5PD - For 5-pin DIN Data / Accessory Port Connector > > f.. SLUSB8PD - For 8-pin DIN Data / Accessory Port Connector > > g.. SLUSB13I - For ICOM 13-pin DIN Accessory Port Connector > > h.. SLUSB13K - For Kenwood 13-pin DIN Accessory Port Connector > > i.. SLUSB6PM - For 6-pin mini DIN Data / Accessory Port Connector > > j.. SLUSBK3 - For the Elecraft K3's rear panel Audio In/Out & PTT jacks > > > > k.. SLUSBNC - Un-terminated cable (bare wires on radio end) for building > > your own cable > > Extra Radio Cables: > > > > a.. SLCAB4R - For 4-Pin Round Mic Connector > > b.. SLCAB8R - For 8-Pin Round Mic Connector > > c.. SLCABRJ1 - For RJ-11 Mic Connector > > d.. SLCABRJ4 - For RJ-45 Mic Connector > > > > e.. SLCAB5PD - For 5-Pin DIN Data / Accessory Port Connector > > f.. SLCAB8PD - For 8-Pin DIN Data / Accessory Port Connector > > g.. SLCAB13I - For ICOM 13-Pin DIN Accessory Port Connector > > h.. SLCAB13K - For Kenwood 13-Pin DIN Accessory Port Connector > > i.. SLCAB6PM - For 6-Pin mini DIN Data / Accessory Port Connector > > j.. SLCABK3 - For the Elecraft K3's rear panel Audio In/Out & PTT jacks > > > > k.. SLCABNC - Un-terminated cable (bare wires on radio end) for building > > your own cable > > Accessories: > > > > a.. Plug & Play Jumper Modules - Click here for part numbers and radios > > supported > > b.. SLHEAD - SignaLink Programming Header for wiring your own jumper module > > The instructions will include details on the jumpers. You will need a cable > > to go from the Signalink USB to the headphone jack also. > > > > I own 2 Signalink USB s and am very happy with them. > > > > > > From: jon_g4fut > > Sent: Tuesday, July 20, 2010 12:44 PM > > To: [email protected] > > Subject: [digitalradio] Yaesu FT-690 > > > > > > > > Does anyone use the FT 690 for 50Mhz digital? Especially with the > > Signalink. If so I'd like to know the equipment number of the connecting > > serial cable which attaches both these units. > > Jon G4FUT > > > > > > > > > > > > > > -------------------------------------------------------------------------------- > > > > > > > > No virus found in this incoming message. > > Checked by AVG - www.avg.com > > Version: 9.0.839 / Virus Database: 271.1.1/3017 - Release Date: 07/20/10 > > 02:36:00 > > > -------------------------------------------------------------------------------- No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.839 / Virus Database: 271.1.1/3017 - Release Date: 07/20/10 02:36:00
