Stefan Lucke wrote: > Hi, > > a tried a rv350 with directfb, but it completly fails with softdevice. > Using this card with X11-Xorg 7.0 at least xv-out works. > > Bought this card as a MSI RX9550. On startup I get the following messages: > .. > (*) DirectFB/Input: Keyboard 0.9 (convergence integrated media GmbH) > (*) DirectFB/Genefx: MMX detected and enabled > (*) DirectFB/Graphics: ATI Radeon 9600 (4153) 1.0 (Claudio Ciccani) > (*) DirectFB/Core/WM: Default 0.2 (Convergence GmbH) > [dfb] RAM: 134217600 bytes > [dfb] Accellerated Functions: FillRectange DrawRectange DrawLine Blit All > [dfb] Drawing Flags: Xor > [dfb] Surface Blitting Flags: SrcColorkey > [dfb] Supported video Modes are: [EMAIL PROTECTED] > [dfb] Enumerating display Layers > [dfb] Configuring CooperativeLevel for OSD > Layer 0 FBDev Primary Layer Type: graphics > Caps: brightness contrast saturation surface > Layer 1 Radeon CRTC1's Overlay Type: graphics picture video > Caps: alphachannel brightness contrast deinterlacing dst_colorkey hue > opacity saturation screen_location surface > (!) [10599: 0.000] --> Caught signal 11 (at 0xb4ff9544, invalid > permissions) <-- > > Will try a second test with current DirectFB cvs version. >
In the current CVS the problem was solved. There is similar thread, however: http://mail.directfb.org/pipermail/directfb-dev/2006-June/001901.html -- Regards, Claudio Ciccani [EMAIL PROTECTED] http://directfb.org http://sf.net/projects/php-directfb _______________________________________________ directfb-dev mailing list [email protected] http://mail.directfb.org/cgi-bin/mailman/listinfo/directfb-dev
