Claudio Ciccani wrote: > Claudio Ciccani wrote: >> Stefan Lucke wrote: >>> On Dienstag 27 Juni 2006 12:14, Claudio Ciccani wrote: >>>> Stefan Lucke wrote: >>>>> Hi, >>>>> >>>>> a tried a rv350 with directfb, but it completly fails with softdevice. >>>>> Using this card with X11-Xorg 7.0 at least xv-out works. >>>>> >>>>> Bought this card as a MSI RX9550. On startup I get the following messages: >>>>> .. >>>>> (*) DirectFB/Input: Keyboard 0.9 (convergence integrated media GmbH) >>>>> (*) DirectFB/Genefx: MMX detected and enabled >>>>> (*) DirectFB/Graphics: ATI Radeon 9600 (4153) 1.0 (Claudio Ciccani) >>>>> (*) DirectFB/Core/WM: Default 0.2 (Convergence GmbH) >>>>> [dfb] RAM: 134217600 bytes >>> Grrrrr. >>> It seems be be a card with bad memory, as with vidix i got OSD only and >>> only a static video picture with constant vertical color stripes. >>> >>> In vidix I could circumvent that by reducing the available video memory to >>> 64M ;-) . >>> >>> But with current DirectFB cvs it works :-)) even without >>> videoram-limit=xx in /etc/directfbrc . >>> >>> Is directfb memory allocation top -> down or bottom -> up ? >> Top -> down. >> > > Lapsus. It's bottom -> up.
It starts to allocate at the end, I think you can say either top or bottom to it :) -- Best regards, Denis Oliver Kropp .------------------------------------------. | DirectFB - Hardware accelerated graphics | | http://www.directfb.org/ | "------------------------------------------" _______________________________________________ directfb-dev mailing list [email protected] http://mail.directfb.org/cgi-bin/mailman/listinfo/directfb-dev
