Bharani sent me this I'm sending it back to the list. I don't see anything wrong here should have just worked tm :(
Mike On 9/28/06, bharani krishna <[EMAIL PROTECTED]> wrote: > herewith below my results. Im running ARM and using xscale tools chain. > > # ./fbset -i > > > > mode "640x480-110" > # D: 50.000 MHz, H: 60.096 kHz, V: 110.066 Hz > geometry 640 480 640 480 32 > timings 20000 64 64 32 32 64 2 > rgba 8/16,8/8,8/0,8/24 > endmode > > > > Frame buffer device information: > Name : OSD Virtual FB > Address : 0x4a400000 > Size : 1228800 > Type : PACKED PIXELS > Visual : TRUECOLOR > XPanStep : 1 > YPanStep : 1 > YWrapStep : 1 > LineLength : 2560 > Accelerator : No > > > > On 9/29/06, Mike Emmel < [EMAIL PROTECTED]> wrote: > > What hardware are you running on ? > > You tried > > dfbg --dfb:pixelformat=ARGB1666 > > dfbg --dfb:pixelformat=RGB16 > > > > and what are the results of fbset ? > > > > > > > > On 9/28/06, bharani krishna <[EMAIL PROTECTED]> wrote: > > > Its the same, i can see blue color much, others colors not much. > > > > > > depth=24 or 18 or 32 (also tried) > > > pixelformat=ARGB / RGB32 > > > mode=1024x768/640x480 > > > > > > But still same i can see blue color, whereas other color not much. > Please > > > let me how to set 565 mode. > > > > > > > > > On 9/28/06, Mike Emmel <[EMAIL PROTECTED]> wrote: > > > > What's your screen pixel depth ? > > > > > > > > This sounds like it's in 1666 mode on one of the 18bpp lcds. If it is > > > > then you get a bluish color as you describe and the rest of the colors > > > > are faded out. Setting only red or green should result in a ugly but > > > > not blue color. > > > > > > > > Try going back to 565 mode it should work. > > > > Next if I'm right support for 18bpp pixels was just added. > > > > > > > > > > > > On 9/28/06, bharani krishna < [EMAIL PROTECTED] > wrote: > > > > > I tried and even added /etc/directfbrc files as below > > > > > > > > > > depth=32 > > > > > pixelformat=ARGB > > > > > mode=640x40 > > > > > > > > > > But still the picture can see more in blue color. By the way im > trying > > > to > > > > > display jpeg picture. > > > > > > > > > > =BK > > > > > > > > > > > > > > > On 9/28/06, Denis Oliver Kropp <[EMAIL PROTECTED]> wrote: > > > > > > bharani krishna schrieb: > > > > > > > Hi all, > > > > > > > > > > > > > > Im able to compile DirectFB 0.9.25 and trying to run 'dfbg' > example > > > code > > > > > > > on ARM. I execute with jpeg, png also, but color is not proper. > I > > > can > > > > > > > see much 'blue' color. Is this anything related to ARGB need to > be > > > set > > > > > > > in DirectFB before run? > > > > > > > > > > > > You can try with the pixelformat option being set to ARGB: > > > > > > > > > > > > dfbg --dfb:pixelformat=ARGB image.png > > > > > > > > > > > > This will only change the format of the display layer if > > > > > > it's the first DirectFB process started in a session. > > > > > > > > > > > > You could also just add "pixelformat = ARGB" to /etc/directfbrc. > > > > > > > > > > > > -- > > > > > > Best regards, > > > > > > Denis Oliver Kropp > > > > > > > > > > > > .------------------------------------------. > > > > > > | DirectFB - Hardware accelerated graphics | > > > > > > | http://www.directfb.org/ | > > > > > > "------------------------------------------" > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > directfb-dev mailing list > > > > > [email protected] > > > > > > > > > http://mail.directfb.org/cgi-bin/mailman/listinfo/directfb-dev > > > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ directfb-dev mailing list [email protected] http://mail.directfb.org/cgi-bin/mailman/listinfo/directfb-dev
