Torgeir Veimo a écrit : > On 21 Jun 2007, at 13:55, Torgeir Veimo wrote: > >> Do you know if the board can be configured to output RGB through it's >> scart output? > > I found out, that it requires using the vt1622 utility that comes with > the viafb source, as described here: > > http://66.249.91.104/translate_c?hl=en&ie=UTF-8&oe=UTF-8&langpair=de%7Cen&u=http://vdr-portal.de/board/thread.php%3Fthreadid%3D54876%26threadview%3D0%26hilight%3D%26hilightuser%3D0%26sid%3Dd0b003a2fe340430b8c9bd268c53b03b%26page%3D3&prev=/language_tools > > > It would be really handy if this would be possible to configure in the > viafb driver itself.
Depending on the board you have, only 3 or all 4 VT1622 DACs may be connected to the outputs. Since your MS-6732 board seem to have a scart connector, you can use it. The EPIA M10k only have 3 DACs connected, that prevent connecting the available outputs in RGB mode (which need R + G + B + Composite as sync signal) It is quite "simple" using the vt1622 utility. I think some people would welcome a patch to the viafb kernel module, to tune this at load-time... -- NH _______________________________________________ directfb-users mailing list [email protected] http://mail.directfb.org/cgi-bin/mailman/listinfo/directfb-users
