Denis Oliver Kropp wrote: > Jon Dufresne wrote: >> Hello, >> >> I am using DFBSee with DIrectFB 1.0.0, using the xine video provider. >> My hardware is an intel 945GM so I am using the intelfb drivers. >> >> I ultimately want my output to be 720p (1280x720) and only that. >> Currently I can only get 1024x768 to work. >> >> I took a look at the file /etc/fb.modes which I believe contains the >> information necessary for the resolution to be set. It appears this >> file is optimized for an ATI device, is this true? >> >> I read the man for fbset and fb.modes. This helped a little bit, >> however I am still extremely confused as to how I should be setting >> the modelines for 720p resolution. Is this display specific, graphics >> chip specific, neither, both? Is there a decent guide around that >> explains how to calculate the values I need? > > If your system boots up with the proper mode, just do "fbset > /etc/fb.modes" > :)
Or delete /etc/fb.modes... -- Best regards, Denis Oliver Kropp .------------------------------------------. | DirectFB - Hardware accelerated graphics | | http://www.directfb.org/ | "------------------------------------------" _______________________________________________ directfb-users mailing list directfb-users@directfb.org http://mail.directfb.org/cgi-bin/mailman/listinfo/directfb-users
