Hello Josh, we don't have the required converter at the institute. Is there any other way to get the desired information from the USRP2?
As I wrote yesterday the behavior is the same with the older firmware version. Thanks, Tobias -----Ursprüngliche Nachricht----- Von: "Josh Blum" <[email protected]> Gesendet: 14.12.2010 18:54:06 An: [email protected] Betreff: Re: [Discuss-gnuradio] cannot ping my USRP2 > > >On 12/14/2010 09:39 AM, Tobias Schmid wrote: >> Hello, >> >> our institute owns 4 USRP2. Three of them can be pinged. >> The 4th one cannot. >> It's neither possible to use it with UHD firmware and FPGA image. >> If I try uhd_find_device no device is found. >> The firmware and the FPGA image on the SD card is working fine. >> I checked this using one of my other devices. >> >> Can someone tell me, what the problem might be? >> Is it demaged? Is the eeprom demaged? >> Or can I solve this problem on my own? >> > >What LEDs light up upon power on? D and F? > >Can you attach a serial terminal to the rear and tell me what the USRP2 >prints to the terminal at power up? >http://www.ettus.com/uhd_docs/manual/html/usrp2.html#debugging-networking-problems > >Can you try an older image set and tell me if the behavior is the same? >http://www.ettus.com/downloads/uhd_images/UHD-images-0000.20100901003255.b5461fc/ > >Thanks, >-Josh > >_______________________________________________ >Discuss-gnuradio mailing list >[email protected] >http://lists.gnu.org/mailman/listinfo/discuss-gnuradio ___________________________________________________________ GRATIS! Movie-FLAT mit über 300 Videos. Jetzt freischalten unter http://movieflat.web.de _______________________________________________ Discuss-gnuradio mailing list [email protected] http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
