On 02/23/2011 11:25 PM, Almohanad Fayez wrote:
I was wondering about people's experience with the UHD driver on the E100 or the Beagleboard. I am able to use it to receive IQ data from the USRP but I can't seem to transmit anything from it ... if I take the same flowgraph to a laptop I'm able to transmit IQ using the same USRP/daughterboard and the UHD driver however when I try to run the same transmitter on the Beagleboard and I check my spectrum analyzer I don't see anything
Data comes out of the E100 fine, I assume you have a USRP1 attached to a beagle via USB?
Philip
I already did a signal capture before sending to the USRP and made sure that there is data getting pushed through ... is there a problem with UHD/USRP sinking on the E100 and the Beagleboard ??? I also made sure that I'm using the latest UHD firmware on the beagleboard. The following is the version info printed when I run the flowgraph: linux; GNU C++ version 4.5.3 20110214 (prerelease); Boost_104500; UHD_0001.20110224034946.1 thanks al fayez _______________________________________________ Discuss-gnuradio mailing list [email protected] http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
_______________________________________________ Discuss-gnuradio mailing list [email protected] http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
