Congratulations.  I knew you would find it since you were that close.

Please share if you are allowed.  I am certain we have wide spread interest
in this particular piece of work.

Bob


On Fri, Dec 16, 2011 at 3:09 AM, Phone Naing MYINT <
phonenaing.my...@sg.panasonic.com> wrote:

>  Hi Bob,****
>
> ** **
>
> Your guess is correct, I found the error from Transmitter side. Now the
> synchronization is working fine.****
>
> ** **
>
> PN****
>
> ** **
>
> *From:* Robert McGwier [mailto:rwmcgw...@gmail.com]
> *Sent:* Thursday, December 15, 2011 8:53 PM
> *To:* Phone Naing MYINT
> *Cc:* discuss-gnuradio@gnu.org; usrp-us...@lists.ettus.com
> *Subject:* Re: [Discuss-gnuradio] Costas loop and M&M algorithm on FPGA***
> *
>
> ** **
>
> At high SNR,  a single bit is probably enough in the detector and 15 bits
> in the phase accumulator is also likely more than enough.  The error, in my
> opinion, is elsewhere.****
>
> ** **
>
> Tell us about your work here please:****
>
> ** **
>
> https://www.cgran.org/ ****
>
> ** **
>
> after you have set up your git repository here:****
>
> ** **
>
> https://github.com/ ****
>
> ** **
>
> and here are some useful instructions****
>
> ** **
>
> http://gnuradio.org/redmine/projects/gnuradio/wiki/DevelopingWithGit ****
>
> ** **
>
> Thanks, in advance, for sharing****
>
> ** **
>
> Bob****
>
> ** **
>
> On Thu, Dec 15, 2011 at 1:52 AM, Phone Naing MYINT <
> phonenaing.my...@sg.panasonic.com> wrote:****
>
> Hi,****
>
>  ****
>
> Anyone here implemented freq/phase correction and symbol timing correction
> in USRP’s FPGA? ****
>
>  ****
>
> Recently I implemented Costas loop and Muller & Mueller algorithm in RTL
> by referring the gnuradio code. Now I’m testing it on FPGA. I can get
> correct demodulated data(DQPSK) at initial few thousand symbols. After that
> I’m getting all rubbish data. ****
>
>  ****
>
> I think the problem with my RTL implementation is not good enough
> bit-resolution (unlike implementation on PC). Currently I’m using 15-bits
> resolution for decimal part. Anyone has any suggestion ?****
>
>  ****
>
> PN  ****
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> Discuss-gnuradio@gnu.org
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio****
>
>
>
> ****
>
> ** **
>
> --
> Bob McGwier****
>
> Facebook: N4HYBob****
>
> ARS: N4HY****
>
> ** **
>
> ** **
>



-- 
Bob McGwier
Facebook: N4HYBob
ARS: N4HY
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

Reply via email to