First of all thanks for your suggestion,
I am using gnuradio 3.7 & started installation of ieee 802.11 from
https://github.com/bastibl/gr-ieee802-11 During installation of log4cpp &
IT++ for sudo port install log4cpp I was getting sudo:port:command not
found. After successful installation of gr_ieee802.11, when I was running
example ofdm_loopback.grc, it is not showing entire blocks & giving error
<<< Welcome to GNU Radio Companion 3.7.1-52 >>>
Loading: "/home/naveen/gr-ieee802-11/examples/ofdm_loopback.grc"
>>> Error: Block key "blocks_ctrlport_monitor_performance" not found in
Platform - grc(GNU Radio Companion)
>>> Error: Block key "ieee802_11_ofdm_parse_mac" not found in Platform -
grc(GNU Radio Companion)
>>> Error: Block key "ofdm_phy_hier" not found in Platform - grc(GNU Radio
Companion)
>>> Error: Block key "ieee802_11_ofdm_mac" not found in Platform - grc(GNU
Radio Companion)
>>> Error: Block key "foo_packet_pad" not found in Platform - grc(GNU Radio
Companion)
>>> Error: Block key "foo_wireshark_connector" not found in Platform -
grc(GNU Radio Companion)
>>> Error: Connection between foo_wireshark_connector_0(0) and
blocks_file_sink_0(0) could not be made.
source block id "foo_wireshark_connector_0" not in block ids
>>> Error: Connection between foo_packet_pad_0(0) and
blocks_multiply_xx_0(0) could not be made.
source block id "foo_packet_pad_0" not in block ids
>>> Error: Connection between ofdm_phy_hier_1(0) and foo_packet_pad_0(0)
could not be made.
source block id "ofdm_phy_hier_1" not in block ids
>>> Error: Connection between blocks_add_xx_0(0) and ofdm_phy_hier_1(0)
could not be made.
sink block id "ofdm_phy_hier_1" not in block ids
>>> Error: Connection between ofdm_phy_hier_1(mac_out) and
ieee802_11_ofdm_parse_mac_0(in) could not be made.
source block id "ofdm_phy_hier_1" not in block ids
>>> Error: Connection between blocks_message_strobe_0(strobe) and
ieee802_11_ofdm_mac_0(app in) could not be made.
sink block id "ieee802_11_ofdm_mac_0" not in block ids
>>> Error: Connection between ofdm_phy_hier_1(mac_out) and
ieee802_11_ofdm_mac_0(phy in) could not be made.
source block id "ofdm_phy_hier_1" not in block ids
>>> Error: Connection between ieee802_11_ofdm_mac_0(phy out) and
ofdm_phy_hier_1(mac_in) could not be made.
source block id "ieee802_11_ofdm_mac_0" not in block ids
>>> Error: Connection between ieee802_11_ofdm_mac_0(phy out) and
foo_wireshark_connector_0(in) could not be made.
source block id "ieee802_11_ofdm_mac_0" not in block ids
>>> Done
Showing: "/home/naveen/gr-ieee802-11/examples/ofdm_loopback.grc"
Please reply me asap
On Mon, Dec 23, 2013 at 2:30 PM, Activecat <[email protected]> wrote:
> You may try your luck here:
>
> 1. https://www.cgran.org/wiki/BBN80211
> but it runs on gnuradio version 3.1.1
>
> 2. MAC code by Uwicore lab http://www.uwicore.umh.es/
> is unfortunately for gnuradio version 3.3
>
> 3. https://github.com/bastibl/gr-ieee802-11
> runs on gnuradio 3.7
>
> Let me know if you find more later.
> Thanks.
>
>
>
> On Mon, Dec 23, 2013 at 2:08 PM, Naveen Gupta <[email protected]>wrote:
>
>> I need to design IEEE802.11 a model in GNU radio platform. How should I
>> start,* I am a beginner *of GNU radio. Anyone please tell me?
>>
>> _______________________________________________
>> Discuss-gnuradio mailing list
>> [email protected]
>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>>
>>
>
_______________________________________________
Discuss-gnuradio mailing list
[email protected]
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
