First you need to install gr-foo from :https://github.com/bastibl/gr-foo After installing it open hierarchical blocks such as - /examples/ofdm_phy_hier.grc in GNURadio and click on generate. Then reload the blocks or close and open GNURadio.
Hope it helps. On Sun, Dec 29, 2013 at 7:51 PM, Naveen Gupta <[email protected]> wrote: > First of all thanks for your suggestion, > I am using gnuradio 3.7 & started installation of ieee 802.11 from > https://github.com/bastibl/gr-ieee802-11 During installation of log4cpp & > IT++ for sudo port install log4cpp I was getting sudo:port:command not > found. After successful installation of gr_ieee802.11, when I was running > example ofdm_loopback.grc, it is not showing entire blocks & giving error > <<< Welcome to GNU Radio Companion 3.7.1-52 >>> > > Loading: "/home/naveen/gr-ieee802-11/examples/ofdm_loopback.grc" > >>> Error: Block key "blocks_ctrlport_monitor_performance" not found in > Platform - grc(GNU Radio Companion) > >>> Error: Block key "ieee802_11_ofdm_parse_mac" not found in Platform - > grc(GNU Radio Companion) > >>> Error: Block key "ofdm_phy_hier" not found in Platform - grc(GNU Radio > Companion) > >>> Error: Block key "ieee802_11_ofdm_mac" not found in Platform - grc(GNU > Radio Companion) > >>> Error: Block key "foo_packet_pad" not found in Platform - grc(GNU > Radio Companion) > >>> Error: Block key "foo_wireshark_connector" not found in Platform - > grc(GNU Radio Companion) > >>> Error: Connection between foo_wireshark_connector_0(0) and > blocks_file_sink_0(0) could not be made. > source block id "foo_wireshark_connector_0" not in block ids > >>> Error: Connection between foo_packet_pad_0(0) and > blocks_multiply_xx_0(0) could not be made. > source block id "foo_packet_pad_0" not in block ids > >>> Error: Connection between ofdm_phy_hier_1(0) and foo_packet_pad_0(0) > could not be made. > source block id "ofdm_phy_hier_1" not in block ids > >>> Error: Connection between blocks_add_xx_0(0) and ofdm_phy_hier_1(0) > could not be made. > sink block id "ofdm_phy_hier_1" not in block ids > >>> Error: Connection between ofdm_phy_hier_1(mac_out) and > ieee802_11_ofdm_parse_mac_0(in) could not be made. > source block id "ofdm_phy_hier_1" not in block ids > >>> Error: Connection between blocks_message_strobe_0(strobe) and > ieee802_11_ofdm_mac_0(app in) could not be made. > sink block id "ieee802_11_ofdm_mac_0" not in block ids > >>> Error: Connection between ofdm_phy_hier_1(mac_out) and > ieee802_11_ofdm_mac_0(phy in) could not be made. > source block id "ofdm_phy_hier_1" not in block ids > >>> Error: Connection between ieee802_11_ofdm_mac_0(phy out) and > ofdm_phy_hier_1(mac_in) could not be made. > source block id "ieee802_11_ofdm_mac_0" not in block ids > >>> Error: Connection between ieee802_11_ofdm_mac_0(phy out) and > foo_wireshark_connector_0(in) could not be made. > source block id "ieee802_11_ofdm_mac_0" not in block ids > >>> Done > > Showing: "/home/naveen/gr-ieee802-11/examples/ofdm_loopback.grc" > Please reply me asap > > > On Mon, Dec 23, 2013 at 2:30 PM, Activecat <[email protected]> wrote: > >> You may try your luck here: >> >> 1. https://www.cgran.org/wiki/BBN80211 >> but it runs on gnuradio version 3.1.1 >> >> 2. MAC code by Uwicore lab http://www.uwicore.umh.es/ >> is unfortunately for gnuradio version 3.3 >> >> 3. https://github.com/bastibl/gr-ieee802-11 >> runs on gnuradio 3.7 >> >> Let me know if you find more later. >> Thanks. >> >> >> >> On Mon, Dec 23, 2013 at 2:08 PM, Naveen Gupta <[email protected]>wrote: >> >>> I need to design IEEE802.11 a model in GNU radio platform. How should I >>> start,* I am a beginner *of GNU radio. Anyone please tell me? >>> >>> _______________________________________________ >>> Discuss-gnuradio mailing list >>> [email protected] >>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >>> >>> >> > > _______________________________________________ > Discuss-gnuradio mailing list > [email protected] > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > >
_______________________________________________ Discuss-gnuradio mailing list [email protected] https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
