I compile GNU Radio with the -DENABLE_PERFORMANCE_COUNTERS=ON, edit the
/etc/gnuradio/conf.d/gnuradio-runtime.conf file to enable 'ctrlport' etc. I
bring up my graph and add the CtrlPort Performance Monitor and CtrlPort Monitor
blocks to my graph and then run the graph.
I get a page fault in this code:
warning: Could not load shared library symbols for linux-vdso64.so.1.
Do you need "set solib-search-path" or "set sysroot"?
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib64/libthread_db.so.1".
Core was generated by `/usr/bin/python -u /home/root/grc_tests/becdl.py '.
Program terminated with signal 11, Segmentation fault.
#0 0x00003fffafce7c80 in rpcbasic_register_get<gr::blocks::throttle,
double>::rpcbasic_register_get (this=0x12c661f0, block_alias=...,
functionbase=<optimized out>, function=<optimized out>, min=..., max=...,
def=..., units_=0x3fffafd60a10 "Hz", desc_=0x3fffafd60a18 "Sample Rate",
minpriv_=RPC_PRIVLVL_MIN, display_=2049)
at
/opt/QorIQ-SDK-V1.8-20150619-yocto/build_b4860qds-64b_release/tmp/work/ppc64e6500-fsl-linux/gnuradio/3.7.10-r0/git/gnuradio-runtime/include/gnuradio/rpcregisterhelpers.h:1076
1076
/opt/QorIQ-SDK-V1.8-20150619-yocto/build_b4860qds-64b_release/tmp/work/ppc64e6500-fsl-linux/gnuradio/3.7.10-r0/git/gnuradio-runtime/include/gnuradio/rpcregisterhelpers.h:
No such file or directory.
(gdb)
Any ideas on what could be happending / done wrong ?
Thanks
W. Kyle Unice
Staff Engineer
MS F1H03
322 North 2200 West Dock 3
Salt Lake City, Utah 84116-0850
Voice: 801-594-2687
_______________________________________________
Discuss-gnuradio mailing list
[email protected]
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
