Neel, Sure it is the B4860QDS running the Yocto 1.8 ‘daisy’ build from the freescale website. I am using the 64-bit build.
K- From: Neel Pandeya [mailto:[email protected]] Sent: Wednesday, September 28, 2016 4:29 PM To: Unice, W. Kyle @ CSG - CSW Cc: [email protected] Subject: Re: [Discuss-gnuradio] ENABLE_PERFORMANCE_COUNTERS Crash Hello Kyle: Yeah, I had a feeling as I looked more closely at the error messages. Could you tell me more about your hardware and your Linux distro/version? --Neel Pandeya On 28 September 2016 at 15:22, <[email protected]<mailto:[email protected]>> wrote: Neel, Actually I am running on a PPC 64-bit platform. root@b4860:~# gcc --version gcc (GCC) 4.9.2 Copyright (C) 2014 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. root@b4860:~# uname -a Linux b4860 3.12.37-rt51-QorIQ-SDK-V1.8+gf488de6 #1 SMP Thu Sep 1 08:15:41 PDT 2016 ppc64 GNU/Linux root@b4860:~# echo $LD_LIBRARY_PATH root@b4860:~# source ./ld.sh root@b4860:~# echo $LD_LIBRARY_PATH /usr/lib64 root@b4860:~# K- From: Neel Pandeya [mailto:[email protected]<mailto:[email protected]>] Sent: Wednesday, September 28, 2016 4:20 PM To: Unice, W. Kyle @ CSG - CSW Cc: [email protected]<mailto:[email protected]> Subject: Re: [Discuss-gnuradio] ENABLE_PERFORMANCE_COUNTERS Crash Hello Kyle: You're running on the E310, right? Where did you build GNU Radio, on the E310, or on the external host? Could you post the output of the following: gcc --version uname -a echo $LD_LIBRARY_PATH --Neel Pandeya On 28 September 2016 at 15:13, <[email protected]<mailto:[email protected]>> wrote: I compile GNU Radio with the –DENABLE_PERFORMANCE_COUNTERS=ON, edit the /etc/gnuradio/conf.d/gnuradio-runtime.conf file to enable ‘ctrlport’ etc. I bring up my graph and add the CtrlPort Performance Monitor and CtrlPort Monitor blocks to my graph and then run the graph. I get a page fault in this code: warning: Could not load shared library symbols for linux-vdso64.so.1. Do you need "set solib-search-path" or "set sysroot"? [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib64/libthread_db.so.1". Core was generated by `/usr/bin/python -u /home/root/grc_tests/becdl.py '. Program terminated with signal 11, Segmentation fault. #0 0x00003fffafce7c80 in rpcbasic_register_get<gr::blocks::throttle, double>::rpcbasic_register_get (this=0x12c661f0, block_alias=..., functionbase=<optimized out>, function=<optimized out>, min=..., max=..., def=..., units_=0x3fffafd60a10 "Hz", desc_=0x3fffafd60a18 "Sample Rate", minpriv_=RPC_PRIVLVL_MIN, display_=2049) at /opt/QorIQ-SDK-V1.8-20150619-yocto/build_b4860qds-64b_release/tmp/work/ppc64e6500-fsl-linux/gnuradio/3.7.10-r0/git/gnuradio-runtime/include/gnuradio/rpcregisterhelpers.h:1076 1076 /opt/QorIQ-SDK-V1.8-20150619-yocto/build_b4860qds-64b_release/tmp/work/ppc64e6500-fsl-linux/gnuradio/3.7.10-r0/git/gnuradio-runtime/include/gnuradio/rpcregisterhelpers.h: No such file or directory. (gdb) Any ideas on what could be happending / done wrong ? Thanks W. Kyle Unice Staff Engineer MS F1H03 322 North 2200 West Dock 3 Salt Lake City, Utah 84116-0850 Voice: 801-594-2687<tel:801-594-2687> _______________________________________________ Discuss-gnuradio mailing list [email protected]<mailto:[email protected]> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
_______________________________________________ Discuss-gnuradio mailing list [email protected] https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
