A NoC block should, as far as I can tell, always start with noc_block_.
Best regards, Marcus On 12/06/2016 10:37 PM, Vishwesh Rege wrote: > Hi, > > What are the list of blocks that I can add? > > For example, > Looking at the list of blocks in usrp3_rfnoc/lib/rfnoc/Makefile.srcs > > From these I could add noc_block_digital_gain (built successfully) > but couldn't add chdr_fifo_large (running make X310_RFNOC_HLS_HG gave > an error) > > How do I know which blocks will work? > > For the error I'm getting in GRC "FIFO_0 block missing" I think > noc_block_axi_fifo_loopback is probably the right one > But what functionality do the other FIFOs provide (when am I supposed > to use them)? > chdr_fifo_large > noc_block_axi_dma_fifo > split_stream_fifo > ram_to_fifo ... etc. > > Thanks, > Vishwesh > > -- > To change the blocks, you need to edit rfnoc_ce_auto_inst_x310.v twice: > You need to change NUM_CE (at the top), and then the actual block list. > > For FIFOs, you can go to the bottom and use the generate for loop to add > more FIFOs. > > You can use make.py to autogenerate this file (in > usrp3/tools/scripts/make.py). > > Cheers, > Martin > > On 12/04/2016 05:55 PM, Vishwesh Rege wrote: > > Hi, > > > > I want to add the FIFO block in usrp3_rfnoc/lib/fifo to USRP along with > > the addsub module in usrp3_rfnoc/lib/hls folder. > > > > I'm running make X310_RFNOC_HLS_HG from usrp3_rfnoc/top/x300 directory > > and then flashing the generated image in build/. > > > > However, the FIFO isn't included in the image for some reason. Only the > > following RFNoC blocks are actually flashed: > > | | | * DmaFIFO_0 > > | | | * Radio_0 > > | | | * Radio_1 > > | | | * AddSub_0 > > | | | * FIR_0 > > | | | * FFT_0 > > | | | * Window_0 > > | | | * NullSrcSink_0 > > | | | * SigGen_0 > > | | | * MovingAverage_0 > > | | | * VectorIIR_0 > > | | | * KeepOneInN_0 > > | | | * fosphor_0 > > > > The Makefile usrp3_rfnoc/top/x300/Makefile.x300.inc already includes > > FIFO_SRCS in DESIGN_SRCS > > > > Do I need to make any changes to include the FIFO? > > > > Any help is appreciated. > > > > > > > > > > > _______________________________________________ > Discuss-gnuradio mailing list > [email protected] > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
_______________________________________________ Discuss-gnuradio mailing list [email protected] https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
