On 06/04/2017 05:16 PM, Qurat-Ul-Ann Akbar wrote:
I understand. But you didnt connect them directly to the USRP. You used some cable to connect the two and had a stand for your antenna. Can you tell me which cable was that ?
I have no idea what you are talking about. When I used the Vert antennas, I connected them directly to the USRP.
If you experience low SNR you'll probably not improve things if you add cables between the SDR and the antenna. I doubt that the antenna or cables are your problem.
Best, Bastian
On Jun 4, 2017 11:13 AM, "Bastian Bloessl" <[email protected] <mailto:[email protected]>> wrote:Hi, On 06/04/2017 04:25 PM, Qurat-Ul-Ann Akbar wrote: Thank you for the explanation. Can you tell me which antennas did you use for your experiments when you wrote your paper? Because I think a major problem with my receiver is a very low SNR because everything works fine with simulations. Currently I am using Vert 2450 antenna with my USRP N210. I used the same setup with the Vert 2450 antennas. Best, Bastian On Sun, Jun 4, 2017 at 12:33 PM, Bastian Bloessl <[email protected] <mailto:[email protected]> <mailto:[email protected] <mailto:[email protected]>>> wrote: Hi, On 6/3/2017 9:11 PM, Qurat-Ul-Ann Akbar wrote: Hello, How is the timing offset being handled in the 802.11 module. I see that the sync_long block does frequency offset correction and the frame_equalizer block does the phase correction but I dont understand where is the timing offset being handled. Can anyone tell me which algorithm is being used to do that? The Sync Long block correlates the signal with the known pattern of the long preamble to derive how the FFTs have to be aligned in time. Best, Bastian
-- Dipl.-Inform. Bastian Bloessl CONNECT Center Trinity College Dublin GitHub/Twitter: @bastibl https://www.bastibl.net/ _______________________________________________ Discuss-gnuradio mailing list [email protected] https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
