Robert, I’m sorry you’re having difficulties with gr-inspector. I have just tried to clone, compile and install gr-inspector on Fedora 25 with GNU Radio 3.7.12 and it worked. Please see the attached screenshot [1] from today as proof. I have seen gr-inspector run on various setups and distros, including Fedora, Ubuntu and Arch Linux. However, I cannot provide support for setting up specific operating systems to meet the dependencies for gr-inspector. I have uploaded my `cmake ..` and `make` command outputs as reference for you [2]. Feel free to compare with your output and I’m sure you’ll be able to track down the issue. Just from skimming I’ve noticed that there is no line in your cmake output telling that Qt4 was found.
[1] https://imgur.com/a/Tm6Ag [2] https://pastebin.com/M1hmA05a Regards, Sebastian Müller gse...@gmail.com PGP ID DC2AA3EE <http://pgp.mit.edu/pks/lookup?op=vindex&search=0x9FFBD55DDC2AA3EE> Am 14. April 2018 um 04:08:43, Robert Stanford (rstanford8...@gmail.com) schrieb: If anyone's interested or having the same issue: I've tried to run the gr-inspector example in a Docker container (seen below) and received the same error message. So the issue doesn't seem to be limited to Ubuntu 17.10. === FROM fedora:27 RUN yum install -y git gnuradio gnuradio-devel qt qt-devel qwt qwt-devel gcc gcc-c++ make cmake python python-devel python-pip qwtplot3d-qt4 qwtplot3d-qt4-devel cppunit-devel RUN yum install -y rtl-sdr xterm gr-osmosdr RUN pip install tensorflow # gr-inspector RUN echo "xterm_executable = /usr/bin/xterm" >> /etc/gnuradio/conf.d/grc.conf RUN git clone https://github.com/gnuradio/gr-inspector /tmp/gr-inspector RUN mkdir /tmp/gr-inspector/build; cd /tmp/gr-inspector/build; cmake ..; make -j4; make install ENV PYTHONPATH $PYTHONPATH:/usr/local/lib64/python2.7/site-packages CMD /bin/bash === On Wed, Apr 11, 2018 at 1:48 PM, Robert Stanford <rstanford8...@gmail.com> wrote: > > I've found and installed the necessary package. It still has the same > error when running the example graph. Like many GNURadio things, this > seems not entirely portable. Has anyone been able to get gr-inspector to > run in a certain Docker environment? > > On Wed, Apr 11, 2018 at 1:34 PM, Sebastian Müller <gse...@gmail.com> > wrote: > >> Hello Robert, >> >> please use the homepage I referenced to find the packages you need. I >> searched for you last mail but I’m sure you’ll find the packages that >> provide the headers as well after a little time of searching. Each OS is >> different and I cannot support users in setting up their system to meet the >> requirements for gr-inspector. >> >> Thanks, >> >> Sebastian Müller >> gse...@gmail.com >> PGP ID DC2AA3EE >> <http://pgp.mit.edu/pks/lookup?op=vindex&search=0x9FFBD55DDC2AA3EE> >> >> Am 10. April 2018 um 22:25:19, Robert Stanford (rstanford8...@gmail.com) >> schrieb: >> >> >> Sebastian - >> >> I have uninstalled qwt and qwtplot3d, and manually verified that no >> files matching their name exists on the fs. I have installed the two >> packages you've included as references (libqwtplot3d-qt4-dev, libqwt-dev). >> >> I have two new errors when running cmake, including a missing qwt header >> file (though as I mentioned, I installed the -dev package). Please see >> https://pastebin.com/ruz43yTu >> >> The header file that is missing is not included in the file list of the >> packages you linked. >> >> Thank you for your patience >> >> >> >> >> On Tue, Apr 10, 2018 at 11:59 AM, Sebastian Müller <gse...@gmail.com> >> wrote: >> >>> Hi Robert, >>> >>> I’m pretty sure you have a corrupt qwt installation on your machine >>> (which is also 90% the issues users have with gr-inspector). >>> The file libqwt-qt4.so.5 does not seem to come from qwt-6.1.0 source >>> build, but from the debian package 'libqwt5-qt4‘. >>> If you just use a symbolic link and trick cmake into finding this file, >>> things might go wrong down the road since this is a qwt 5 library! I would >>> avoid using symlinks for this purpose at all. See my other comments below. >>> >>> Am 9. April 2018 um 20:26:36, Robert Stanford (rstanford8...@gmail.com) >>> schrieb: >>> >>> >>> Thanks for getting back to me. The packages I installed were: >>> >>> - libqwtplot3d-qt4-0v5, libqwtplot3d-qt4-dev from apt install >>> - qwt-6.1.0 (not the most recent, but what the page recommends), from >>> source. I'd previously tried installing the most recent from the repos >>> (apt), but had the same error I mentioned above so uninstalled and >>> installed this recommended version from source. >>> - I installed this using these instructions: http://qwt.sourc >>> eforge.net/qwtinstall.html >>> >>> Please uninstall all qwt related packages and files from your machine. >>> As mentioned above, there seems to be other (broken) qwt installations. >>> This is not an easy task, so please take some time to clean everything up! >>> >>> >>> >>> gr-inspector (cmake) had errors until I did these three things: >>> - apt install gnuradio-dev >>> >>> This is normal if you didn’t build GNU Radio from source. >>> >>> >>> - ln -s /usr/include/qwt /usr/include/qwtplot3d-qt4 >>> >>> You are symlinking a qwt directory to a qwtplot3d directory. This does >>> not make sense to me and will most likely cause problems. All the files you >>> need should be in /usr/include/qwtplot3d-qt4 and be provided by >>> ‚libqwtplot3d-qt4-dev‘ [1]. If they are not there, something is wrong with >>> your system. >>> >>> If the files are there, please share the output of cmake without >>> symlinking beforehand. >>> >>> >>> - ln -s /usr/lib/libqwt-qt4.so.5 /usr/lib/libqwt-qt4.so >>> >>> Same thing here libqwt-qt5.so.5 is most likely no file from qwt-6.1.0. >>> The library that you need is in /usr/lib/libqwt.so and is provided by >>> ‚libqwt-dev‘ [2]. If not, again, something is wrong with your system. >>> >>> - I found that I had to do this: export >>> CMAKE_MODULE_PATH=/home/rs/devel/gr-inspector/cmake/Modules; >>> cmake .. >>> >>> This should also not be necessary. What is the error if you don’t do >>> this? >>> >>> >>> >>> So, either I am doing something wrong by this point, or there are four >>> extra steps (above) that are required to get gr-inspector working on my >>> system (Ubuntu 17.10, gnuradio 3.7.10) >>> >>> Yes, from the points I mentioned above I don’t think you’re getting a >>> successful build from here on. >>> >>> >>> >>> I've cleaned and built again to show the output. Here is the output of >>> 'cmake ..': https://pastebin.com/c3hnmNDx >>> >>> Here is the output of 'make -j4': https://pastebin.com/zHUAZGn3 >>> >>> I load the sample graph into gnuradio-companion, and get the error >>> again: https://pastebin.com/DFGAtmGz >>> >>> As for the PLL error (while tuning the rtl-sdr), that's something I >>> normally experience. It's never been a show-stopper and I think it can be >>> ignored in this case. I am not tuning to 2.4MHz but am using a 2.4MS/s >>> sample rate. >>> >>> Thank you again >>> >>> >>> [1] https://packages.ubuntu.com/artful/amd64/libqwtplot3d-qt4-de >>> v/filelist >>> >>> [2] https://packages.ubuntu.com/artful/amd64/libqwt-dev/filelist >>> >>> >>> Sebastian Müller >>> gse...@gmail.com >>> PGP ID DC2AA3EE >>> <http://pgp.mit.edu/pks/lookup?op=vindex&search=0x9FFBD55DDC2AA3EE> >>> >>> >>> >>> >>> On Mon, Apr 9, 2018 at 12:40 PM, Sebastian Müller <gse...@gmail.com> >>> wrote: >>> >>>> Hi Robert, >>>> >>>> Am 9. April 2018 um 01:31:42, Robert Stanford (rstanford8...@gmail.com) >>>> schrieb: >>>> >>>> >>>> I have cloned and installed gr-inspector using the instructions on the >>>> webpage. One change (addition) necessary to get gr-inspector to install on >>>> my system (Ubuntu 17.10) was to run ln -s /usr/lib/libqwt-qt4.so.5 >>>> /usr/lib/libqwt-qt4.so ; otherwise cmake failed, unable to find >>>> libqwt-qt4.so. >>>> >>>> Can you please provide a *complete* list of qwt packages you installed >>>> as well as the version? (For instance with `dpkg -s [package]`) >>>> >>>> Also, please provide the output of cmake when before and after the `ln >>>> -s` command you mention. >>>> >>>> Lastly, I’d like to see the output of `make` after a successful cmake >>>> run. You can use pastebin or something similar since this all is a lot of >>>> output. >>>> >>>> I have started gnuradio companion and loaded an example from >>>> gr-inspector (live_signal_detection.grc). I adjust the sample rate, since >>>> I am using an RTL-SDR (adjust to 2.4e6). The graph comes up, and I press >>>> 'play' (execute the flow graph). I get this error: >>>> >>>> Found Rafael Micro R820T tuner >>>> [R82XX] PLL not locked! >>>> [R82XX] PLL not locked! >>>> >>>> I’m not aware of any RTL SDRs that can be tuned to 2.4 MHz (correct me >>>> if I’m wrong). That’s probably why you get the PLL error here. >>>> >>>> >>>> Traceback (most recent call last): >>>> File "/home/rs/devel/gr-inspector/examples/live_signal_detection.py", >>>> line 142, in <module> >>>> main() >>>> File "/home/rs/devel/gr-inspector/examples/live_signal_detection.py", >>>> line 130, in main >>>> tb = top_block_cls() >>>> File "/home/rs/devel/gr-inspector/examples/live_signal_detection.py", >>>> line 85, in __init__ >>>> self.inspector_signal_detector_cvf_0 = >>>> inspector.signal_detector_cvf(samp_rate, 4096, >>>> firdes.WIN_BLACKMAN_hARRIS, >>>> AttributeError: 'module' object has no attribute 'signal_detector_cvf' >>>> >>>> This just means gr-inspector was not installed correctly. To >>>> investigate, please provide the outputs I mentioned above. >>>> >>>> >>>> >>>> GNUradio (3.7.10) executes other graphs fine (that is, >>>> non-gr-inspector graphs). Why am I getting this error with gr-inspector? >>>> >>>> Thank you >>>> _______________________________________________ >>>> Discuss-gnuradio mailing list >>>> Discuss-gnuradio@gnu.org >>>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >>>> >>>> >>>> >>>> Cheers, >>>> >>>> Sebastian Müller >>>> gse...@gmail.com >>>> PGP ID DC2AA3EE >>>> <http://pgp.mit.edu/pks/lookup?op=vindex&search=0x9FFBD55DDC2AA3EE> >>>> >>>> _______________________________________________ >>>> Discuss-gnuradio mailing list >>>> Discuss-gnuradio@gnu.org >>>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >>>> >>>> >>> >>> >>> >>> >>> >>> _______________________________________________ >>> Discuss-gnuradio mailing list >>> Discuss-gnuradio@gnu.org >>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >>> >>> >> >> _______________________________________________ >> Discuss-gnuradio mailing list >> Discuss-gnuradio@gnu.org >> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >> >> >
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
