Hi Vincenzo,
no such thing as "closed" :)
Well, that path is where your GNU Radio is installed to. You should be
able to check it through `gnuradio-config-info --prefix`.
To repeat my questions:
1. Did `cmake...` run through successfully? Or did it end with an error?
2. Did `make` run through successfully? Or did it end with an error?
3. Did `sudo make install` run through successfully? Or did it end with
an error?
Best regards,
Marcus
On 8/31/20 7:25 PM, Vincenzo Mone wrote:
Sorry Marcus,
I thought it was closed as I did not get any reply from a long time.
Please what I need to check as I still did not understood how to know The
gnuradio path for the correct command:
cmake -DCMAKE_INSTALL_PREFIX= "path to gnuradio installation" ../
Thanks
73's de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520
*********************************
****** GSM +39 328 7110193 ******
***** SMS +39 328 7110193 *****
*********************************
-----Messaggio originale-----
Da: Marcus Müller <[email protected]>
Inviato: lunedì 31 agosto 2020 18:11
A: Vincenzo Mone <[email protected]>; Gnuradio Mailing List <discuss-
[email protected]>
Oggetto: Re: Funcube Dongle Pro Plus help
Vincenzo,
please don't open a new thread for every other email you have sent. You
have gotten easily confused in the past, and we can avoid that if you can
try
to focus on staying on a single email thread, and it was a big problem for
you.
Please don't open a new thread before having solved this issue, and
instead
reply to the things here, keeping [email protected] in CC:.
Something went wrong during your software build or installation. We can't
tell you what that was - have you checked whether the cmake, the make,
the make install commands were successful?
Best regards,
Marcus
On 8/31/20 5:09 PM, Vincenzo Mone wrote:
Hello
Please I am trying to install the FCDPROPLUS which is the Funcube
Dongle Pro Plus.
This is what I've done following the instructions on the author page:
git clone https://github.com/dl1ksv/gr-fcdproplus
cd ~/gr-fcdproplus
mkdir build
cd build
cmake -DCMAKE_INSTALL_PREFIX="/usr" -DCMAKE_BUILD_TYPE=Release
../
make
sudo make install
sudo ldconfig
then I have created a file named '99-usb-serial.rules' with the
following content:
SUBSYSTEMS=="usb" ATTRS{idVendor}=="04d8"
ATTRS{idProduct}=="fb56"
MODE:="0666"
SUBSYSTEMS=="usb" ATTRS{idVendor}=="04d8"
ATTRS{idProduct}=="fb31"
MODE:="0666"
KERNEL=="hidraw*", ATTRS{busnum}=="1", ATTRS{idVendor}=="04d8",
ATTRS{idProduct}=="fb56", MODE="0666"
KERNEL=="hidraw*", ATTRS{busnum}=="1", ATTRS{idVendor}=="04d8",
ATTRS{idProduct}=="fb
Then:
cd /etc/udev/rules.d
sudo cp -v ~/<your folder>/99-usb-serial.rules ./
sudo udevadm trigger
After that executing grc I sould find in Fcd
Funcube Dongle
Funcube Dongle control
Funcube Dongle Pro+
Funcube Dongle Pro+ control
But I do not find any FCD group.
Please anybody can tell me if I am doing something wrong?
Thanks
73's de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520
*********************************
****** GSM +39 328 7110193 ******
***** SMS +39 328 7110193 *****
*********************************
