Hi Marcus, thanks for your reply. I gave the command: gnuradio-config-info --prefix
and got : /usr/local So I have tried to give the command: cmake -DCMAKE_INSTALL_PREFIX= "/usr/local/" ../ - Checking for module 'mpir >= 3.0' -- No package 'mpir' found -- Could NOT find MPIR (missing: MPIRXX_LIBRARY MPIR_LIBRARY MPIR_INCLUDE_DIR) -- User set python executable /usr/bin/python3 -- Found PythonLibs: /usr/lib/x86_64-linux-gnu/libpython3.8.so (found suitable exact version "3.8.2") -- Found ALSA 1.2.2 -- Found jack: /usr/lib/x86_64-linux-gnu/libjack.so -- Extracting version information from git describe... -- System Hidapi will be used -- -- Checking for module SWIG -- Found SWIG version 4.0.1. -- Found PythonLibs: /usr/lib/x86_64-linux-gnu/libpython3.8.so (found version "3.8.2") -- Doxxyfile found in /usr/share/gnuradio/modtool/templates/gr-newmod/docs/doxygen -- ================ Build Summary ========================= -- Building gr-fcdproplus : 3.8.0 for Linux -- Building for gnuradio : 3.8.1.0 -- Using CMAKE Module path : /home/enzo/gr-fcdproplus/cmake/Modules;/usr/local/lib/cmake/gnuradio -- CMake Modules Dir : lib/cmake -- fcdproplus INCLUDES : include/fcdproplus -- Using install prefix : -- Installing grc files to : /share/gnuradio/grc/blocks -- System Hidapi Lib /usr/lib/x86_64-linux-gnu/libhidapi-libusb.so is used -- ======================================================== -- Configuring done -- Generating done -- Build files have been written to: /home/enzo/gr-fcdproplus/build Then I gave the other commands: make sudo make install sudo ldconfig Did not get any errors on the above commands Went again in gnuradio but still get the missing block fcdproplus_fcdproplus Thanks 73’s de Enzo IK8OZV EasyLog 5 BetaTester EasyLog PDA BetaTester WinBollet BetaTester D.C.I. CheckPoint Regione Campania Skype: ik8ozv8520 ********************************* ****** GSM +39 328 7110193 ****** ***** SMS +39 328 7110193 ***** ********************************* > -----Messaggio originale----- > Da: Marcus Müller <muel...@kit.edu> > Inviato: lunedì 31 agosto 2020 19:37 > A: Vincenzo Mone <vim...@alice.it> > Cc: Gnuradio Mailing List <discuss-gnuradio@gnu.org> > Oggetto: Re: R: Funcube Dongle Pro Plus help > > Hi Vincenzo, > > no such thing as "closed" :) > > Well, that path is where your GNU Radio is installed to. You should be able to > check it through `gnuradio-config-info --prefix`. > > To repeat my questions: > > 1. Did `cmake...` run through successfully? Or did it end with an error? > > 2. Did `make` run through successfully? Or did it end with an error? > > 3. Did `sudo make install` run through successfully? Or did it end with an > error? > > Best regards, > Marcus > > On 8/31/20 7:25 PM, Vincenzo Mone wrote: > > Sorry Marcus, > > I thought it was closed as I did not get any reply from a long time. > > Please what I need to check as I still did not understood how to know > > The gnuradio path for the correct command: > > > > cmake -DCMAKE_INSTALL_PREFIX= "path to gnuradio installation" ../ > > > > Thanks > > > > 73's de Enzo IK8OZV > > EasyLog 5 BetaTester > > EasyLog PDA BetaTester > > WinBollet BetaTester > > D.C.I. CheckPoint Regione Campania > > Skype: ik8ozv8520 > > > > > > > > > > ********************************* > > ****** GSM +39 328 7110193 ****** > > ***** SMS +39 328 7110193 ***** > > ********************************* > > > >> -----Messaggio originale----- > >> Da: Marcus Müller <muel...@kit.edu> > >> Inviato: lunedì 31 agosto 2020 18:11 > >> A: Vincenzo Mone <vim...@alice.it>; Gnuradio Mailing List <discuss- > >> gnura...@gnu.org> > >> Oggetto: Re: Funcube Dongle Pro Plus help > >> > >> Vincenzo, > >> > >> please don't open a new thread for every other email you have sent. > >> You have gotten easily confused in the past, and we can avoid that if > >> you can > > try > >> to focus on staying on a single email thread, and it was a big > >> problem for > > you. > >> Please don't open a new thread before having solved this issue, and > > instead > >> reply to the things here, keeping discuss-gnuradio@gnu.org in CC:. > >> > >> Something went wrong during your software build or installation. We > >> can't tell you what that was - have you checked whether the cmake, > >> the make, the make install commands were successful? > >> > >> Best regards, > >> > >> Marcus > >> > >> On 8/31/20 5:09 PM, Vincenzo Mone wrote: > >>> Hello > >>> > >>> Please I am trying to install the FCDPROPLUS which is the Funcube > >>> Dongle Pro Plus. > >>> > >>> This is what I've done following the instructions on the author page: > >>> > >>> git clone https://github.com/dl1ksv/gr-fcdproplus > >>> > >>> cd ~/gr-fcdproplus > >>> > >>> mkdir build > >>> > >>> cd build > >>> > >>> cmake -DCMAKE_INSTALL_PREFIX="/usr" - > DCMAKE_BUILD_TYPE=Release > >> ../ > >>> make > >>> > >>> sudo make install > >>> > >>> sudo ldconfig > >>> > >>> then I have created a file named '99-usb-serial.rules' with the > >>> following content: > >>> > >>> SUBSYSTEMS=="usb" ATTRS{idVendor}=="04d8" > >> ATTRS{idProduct}=="fb56" > >>> MODE:="0666" > >>> > >>> SUBSYSTEMS=="usb" ATTRS{idVendor}=="04d8" > >> ATTRS{idProduct}=="fb31" > >>> MODE:="0666" > >>> > >>> KERNEL=="hidraw*", ATTRS{busnum}=="1", ATTRS{idVendor}=="04d8", > >>> ATTRS{idProduct}=="fb56", MODE="0666" > >>> > >>> KERNEL=="hidraw*", ATTRS{busnum}=="1", ATTRS{idVendor}=="04d8", > >>> ATTRS{idProduct}=="fb > >>> > >>> Then: > >>> > >>> cd /etc/udev/rules.d > >>> > >>> sudo cp -v ~/<your folder>/99-usb-serial.rules ./ > >>> > >>> sudo udevadm trigger > >>> > >>> After that executing grc I sould find in Fcd > >>> > >>> Funcube Dongle > >>> > >>> Funcube Dongle control > >>> > >>> Funcube Dongle Pro+ > >>> > >>> Funcube Dongle Pro+ control > >>> > >>> But I do not find any FCD group. > >>> > >>> Please anybody can tell me if I am doing something wrong? > >>> > >>> Thanks > >>> > >>> 73's de Enzo IK8OZV > >>> EasyLog 5 BetaTester > >>> EasyLog PDA BetaTester > >>> WinBollet BetaTester > >>> D.C.I. CheckPoint Regione Campania > >>> Skype: ik8ozv8520 > >>> > >>> > >>> > >>> > >>> ********************************* > >>> > >>> ****** GSM +39 328 7110193 ****** > >>> > >>> ***** SMS +39 328 7110193 ***** > >>> > >>> ********************************* > >>>