I don't know for certain - but I would guess at least most of their newer 
routers would support it in hardware.  My question is if you're going to 
install DD-WRT anyway why wouldn't you just go with a router that has it 
pre-installed?  Why bother with figuring out which device is ideal and doing 
the actual flash yourself...

On Feb 10, 2011, at 6:48 PM, John Abreau wrote:

> Is that just the stok Linksys firmware? I would hope that DD-WRT or Tomato 
> would support IPv6. 
> 
> 
> 
> On Wed, Feb 9, 2011 at 9:45 PM, Anthony Gabrielson <agabriels...@comcast.net> 
> wrote:
> Another interesting note is running on slashdot.  Apparently Linksys routers 
> don't currently support IPV6.
> 
> http://www.networkworld.com/news/2011/020811-cisco-linksys-ipv6.html
> 
> Anthony
> 
> On Feb 8, 2011, at 7:15 PM, edwa...@linuxmail.org wrote:
> 
> > It appears that my Linksys WRT54G router is on its way out.  Wireless
> > works perfectly, but Ethernet connections (regardless of port used) get
> > flaky after a few minutes of receiving the IP address.
> >
> > This was my second Linksys over the years, the first one was replaced
> > because the signal of the wireless portion of that was too weak for the
> > laptop to receive, even when the laptop was sitting right next to it.
> >
> > I was considering going with another Linksys, as I am already familiar
> > with its setup screens.
> >
> > Are there any better ones out there that are just as easy to setup as
> > Linksys?
> >
> > TIA for any suggestions...
> >
> >
> > _______________________________________________
> > Discuss mailing list
> > Discuss@blu.org
> > http://lists.blu.org/mailman/listinfo/discuss
> 
> 
> _______________________________________________
> Discuss mailing list
> Discuss@blu.org
> http://lists.blu.org/mailman/listinfo/discuss
> 
> 
> 
> -- 
> John Abreau / Executive Director, Boston Linux & Unix 
> GnuPG KeyID: 0xD5C7B5D9 / Email: abre...@gmail.com
> GnuPG FP: 72 FB 39 4F 3C 3B D6 5B E0 C8 5A 6E F1 2C BE 99

_______________________________________________
Discuss mailing list
Discuss@blu.org
http://lists.blu.org/mailman/listinfo/discuss

Reply via email to