Hello, last week came out new firmware for the LSI 9300-16i. My ditributor tested this on the system described below. They said the issue is gone. I will recheck this in detail tonight.
Frank Thursday, September 8, 2016, 12:39:47 AM, you wrote: FM> I testet now without SSDs and with only 1 HDD in a testpool - same errors... FM> Wednesday, September 7, 2016, 6:39:06 PM, you wrote: FM>> Hi, FM>> I forward this message because there is no reaction yet in the FM>> OmniOS-list hoping anybody can help here... FM>> This is a forwarded message FM>> From: Frank M. <info....@gmx.de> FM>> To: Bob Friesenhahn <bfrie...@simple.dallas.tx.us> FM>> Date: Tuesday, September 6, 2016, 3:18:06 PM FM>> Subject: [OmniOS-discuss] LSI 9300-16i SAS and OmniOS? FM>> ===8<==============Original message text=============== FM>> Hi, FM>> I have an new system with a LSI 9300-16i in slot3 of a X10DRi-T4+ FM>> motherboard on a 6G-Backplane. FM>> In my short tests with barmetal OmniOS there were no problems. But I FM>> would use VMware-virtualized OmniOS with passthrough LSI-HBA. And here FM>> I have massive problems... The disks/pools crash after a short time FM>> with low load. FM>> I testet the HBA in another PCIe-slot - I havn´t seen any problems, but FM>> I havn´t looked into the logfile. FM>> Supermicro recommended to set jumper JI2C1 and JI2C2 to FM>> 2-3 - but they were set to this already. So I set the jumper to 1-2. FM>> Now disks/pools crash still earlier. FM>> The HBA gets very hot, but I testet it also with "special" airflow - FM>> the same.... FM>> I attached the logfile... FM>> What does it mean "FastPath": FM>> ---- FM>> Sep 6 15:07:05 test-san1 scsi: [ID 243001 kern.info] FM>> w5000cca24200d4fd FastPath Capable and Enabled FM>> Sep 6 15:07:05 test-san1 scsi: [ID 243001 kern.info] FM>> w4433221106000000 FastPath Capable but Disabled FM>> Sep 6 15:07:05 test-san1 scsi: [ID 243001 kern.info] FM>> w5000cca24200d4c9 FastPath Capable and Enabled FM>> Sep 6 15:07:05 test-san1 scsi: [ID 243001 kern.info] FM>> w5000cca2426fff85 FastPath Capable and Enabled FM>> Sep 6 15:07:05 test-san1 scsi: [ID 243001 kern.info] FM>> w5000cca24200d33d FastPath Capable and Enabled FM>> Sep 6 15:07:05 test-san1 scsi: [ID 243001 kern.info] FM>> w5000cca24200d4c9 FastPath Capable and Enabled FM>> ---- FM>> and later: FM>> ---- FM>> Sep 6 15:10:19 test-san1 scsi: [ID 107833 kern.warning] WARNING: FM>> /pci@0,0/pci15ad,7a0@18/pci1000,3130@0 (mpt_sas19): FM>> Sep 6 15:10:19 test-san1 MPT Firmware Fault, code: 5854 FM>> Sep 6 15:10:21 test-san1 scsi: [ID 365881 kern.info] FM>> /pci@0,0/pci15ad,7a0@18/pci1000,3130@0 (mpt_sas19): FM>> Sep 6 15:10:21 test-san1 MPT Firmware version v12.0.0.0 (SAS3008) FM>> Sep 6 15:10:21 test-san1 scsi: [ID 365881 kern.info] FM>> /pci@0,0/pci15ad,7a0@18/pci1000,3130@0 (mpt_sas19): FM>> Sep 6 15:10:21 test-san1 mpt_sas19 SAS 3 Supported FM>> Sep 6 15:10:21 test-san1 scsi: [ID 365881 kern.info] FM>> /pci@0,0/pci15ad,7a0@18/pci1000,3130@0 (mpt_sas19): FM>> Sep 6 15:10:21 test-san1 mpt19: IOC Operational. FM>> Sep 6 15:10:28 test-san1 scsi: [ID 243001 kern.info] FM>> w4433221100000000 FastPath Capable but Disabled FM>> Sep 6 15:10:28 test-san1 last message repeated 1 time FM>> Sep 6 15:10:28 test-san1 scsi: [ID 243001 kern.info] FM>> w4433221101000000 FastPath Capable but Disabled FM>> Sep 6 15:10:28 test-san1 last message repeated 1 time FM>> Sep 6 15:10:29 test-san1 scsi: [ID 243001 kern.info] FM>> w4433221102000000 FastPath Capable but Disabled FM>> Sep 6 15:10:29 test-san1 last message repeated 1 time FM>> Sep 6 15:10:29 test-san1 scsi: [ID 243001 kern.info] FM>> w4433221103000000 FastPath Capable but Disabled FM>> Sep 6 15:10:29 test-san1 last message repeated 1 time FM>> Sep 6 15:10:29 test-san1 scsi: [ID 243001 kern.info] FM>> w4433221106000000 FastPath Capable but Disabled FM>> Sep 6 15:10:29 test-san1 last message repeated 1 time FM>> Sep 6 15:10:29 test-san1 scsi: [ID 243001 kern.info] FM>> w4433221107000000 FastPath Capable but Disabled FM>> Sep 6 15:10:29 test-san1 last message repeated 1 time FM>> Sep 6 15:10:31 test-san1 scsi: [ID 107833 kern.warning] WARNING: FM>> /pci@0,0/pci15ad,7a0@18/pci1000,3130@0 (mpt_sas19): FM>> Sep 6 15:10:31 test-san1 MPT Firmware Fault, code: 5854 FM>> Sep 6 15:10:32 test-san1 scsi: [ID 365881 kern.info] FM>> /pci@0,0/pci15ad,7a0@18/pci1000,3130@0 (mpt_sas19): FM>> Sep 6 15:10:32 test-san1 MPT Firmware version v12.0.0.0 (SAS3008) FM>> Sep 6 15:10:32 test-san1 scsi: [ID 365881 kern.info] FM>> /pci@0,0/pci15ad,7a0@18/pci1000,3130@0 (mpt_sas19): FM>> Sep 6 15:10:32 test-san1 mpt_sas19 SAS 3 Supported FM>> Sep 6 15:10:32 test-san1 scsi: [ID 365881 kern.info] FM>> /pci@0,0/pci15ad,7a0@18/pci1000,3130@0 (mpt_sas19): FM>> Sep 6 15:10:32 test-san1 mpt19: IOC Operational. FM>> Sep 6 15:10:40 test-san1 scsi: [ID 243001 kern.info] FM>> w4433221100000000 FastPath Capable but Disabled FM>> Sep 6 15:10:40 test-san1 scsi: [ID 243001 kern.info] FM>> w4433221101000000 FastPath Capable but Disabled FM>> Sep 6 15:10:40 test-san1 scsi: [ID 243001 kern.info] FM>> w4433221102000000 FastPath Capable but Disabled FM>> Sep 6 15:10:40 test-san1 scsi: [ID 243001 kern.info] FM>> w4433221103000000 FastPath Capable but Disabled FM>> Sep 6 15:10:41 test-san1 scsi: [ID 243001 kern.info] FM>> w4433221106000000 FastPath Capable but Disabled FM>> Sep 6 15:10:41 test-san1 scsi: [ID 243001 kern.info] FM>> w4433221107000000 FastPath Capable but Disabled FM>> ---- FM>> For information: FM>> pool1 6x SATA-SSD Raidz2 FM>> pool2 4x SAS-HDD 2 mirrored vdev with SATA-SSD l2arc FM>> I hope anybody has any useful hints... FM>> PS: FM>> Tonight I want to test with only one HDD... FM>> Frank FM>> Sunday, September 4, 2016, 4:46:45 PM, you wrote: BF>>> On Sun, 4 Sep 2016, Peter Tribble wrote: >>>> On Sat, Sep 3, 2016 at 10:42 PM, Bob Friesenhahn < >>>> bfrie...@simple.dallas.tx.us> wrote: >>>> >>>>> Is the LSI 9300-16i SAS support in OmniOS known to be robust? >>>>> >>>>> I am planning to use it with the SuperMicro SC836BA-R920B 3U case and >>>>> Supermicro X10DRi-T4+ motherboard to build a storage server. >>>>> >>>>> Is there anything about this HBA and motherboard that might cause an >>>>> issue? >>>>> >>>> >>>> Should be good. We're using that X10DRi-T4+ motherboard with the LSI >>>> 9300-8i HBA (in the 2U chassis, >>>> where the 16i wouldn't fit), and everything has worked perfectly so far. BF>>> That is good to hear. I did not see any hardware on the motherboard BF>>> which is not supported by OmniOS. BF>>> Something which is not clear to me (or to my computer builder) is if BF>>> using a 12gb SAS HBA and 12gb SAS disks with a passive backplane BF>>> described by SuperMicro as being 3g/6g might cause issues. It is not BF>>> clear if the end devices somehow detect that the chassis is certified BF>>> for 6g or if they will use 12g and possibly work just fine, or BF>>> encounter issues. The signalling and cables for 6g and 12g are the BF>>> same, but with 12g using a higher clocking rate. BF>>> Bob --- Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft. https://www.avast.com/antivirus ------------------------------------------- illumos-discuss Archives: https://www.listbox.com/member/archive/182180/=now RSS Feed: https://www.listbox.com/member/archive/rss/182180/21175430-2e6923be Modify Your Subscription: https://www.listbox.com/member/?member_id=21175430&id_secret=21175430-6a77cda4 Powered by Listbox: http://www.listbox.com
