Luis Gomez-san, CC: opendaylight personnel This is Hitoshi in NTT labs.
Did you have a chance to see the below email I sent you day after yesterday ? I hope to know whether ODL implement control over VxLAN. I'll happy to receive information about it, anything is fine. Thank you. Regards, Hitoshi Kaneko E-mail: Hitoshi Kaneko <[email protected]> -----Original Message----- From: Hitoshi Kaneko <[email protected]> Sent: Wednesday, February 19, 2020 7:09 PM To: 'Luis Gomez' <[email protected]> Cc: '[email protected]' <[email protected]> Subject: About setting VxLAN through ODL/Netconf Luis Gomez-san, This is Hitoshi in NTT labs. Thank you for helping me about how to set NIC-IP-address to vMX from ODL other day recently at below mail. Now, I want to evaluate VxLAN-control from ODL/Netconf to JUNOS(vMX). I have been able to set VxLAN to vMX from command-line. I'm very happy if you advise me about it, for example, giving related URLs, anything is fine. Thank you. Regards, Hitoshi Kaneko E-mail: Hitoshi Kaneko <[email protected]> -----Original Message----- From: [email protected] <[email protected]> On Behalf Of Luis Gomez Sent: Monday, November 4, 2019 4:50 AM To: Hitoshi Kaneko <[email protected]> Cc: [email protected] Subject: Re: [netconf-dev] about setting NIC-IP-address through ODL/Netconf Hi Hitoshi, See my comments in-line: On Oct 31, 2019, at 1:45 AM, Hitoshi Kaneko <[email protected] <mailto:[email protected]> > wrote: Luis Gomez-san, This is Hitoshi. Thank you for your answer and kindness. enough CPU (4 CPUs) and RAM (8GB) and you setup the java heap to -Xmx8G. I show my machine conditions with below LOGs. Is it enough? It seems very sufficient, so I do not think the problem you are hitting is due to the controller system resources. As the problem of ‘not responding in several minutes’ has persisted with above machine conditions, I have tried two actions below. 1) I have demanded Juniper, Ltd to send me Junos 18.1.(now, 17.2R1) 2) I have been increasing yang schema files that is specified when node is created, because I have specified only 2 schema files till now, as there are many schema files for Junos 17.2R1. No comments, just try with updated JUNOS and let us know if that works better for you. Please advise me if you have comments above actions. Thank you. Regards, Hitoshi Kaneko E-mail: Hitoshi Kaneko <[email protected] <mailto:[email protected]> > --------------- LOGs --------------------------- 【CPU cores, etc.】 kaneko@kaneko-PowerEdge-T130-3:~$ cat /proc/cpuinfo | grep "cpu cores" cpu cores : 4 cpu cores : 4 cpu cores : 4 cpu cores : 4 cpu cores : 4 cpu cores : 4 cpu cores : 4 cpu cores : 4 kaneko@kaneko-PowerEdge-T130-3:~$ cat /proc/cpuinfo | grep "physical id" physical id : 0 physical id : 0 physical id : 0 physical id : 0 physical id : 0 physical id : 0 physical id : 0 physical id : 0 kaneko@kaneko-PowerEdge-T130-3:~$ cat /proc/cpuinfo | grep processor processor : 0 processor : 1 processor : 2 processor : 3 processor : 4 processor : 5 processor : 6 processor : 7 kaneko@kaneko-PowerEdge-T130-3:~$
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#8532): https://lists.opendaylight.org/g/Discuss/message/8532 Mute This Topic: https://lists.opendaylight.org/mt/71444650/21656 Group Owner: [email protected] Unsubscribe: https://lists.opendaylight.org/g/Discuss/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
