Luis Gomez-san, This is Hitoshi in NTT labs.
I am always grateful for your help. I will try to do your advice. Please continue to take care of me. Thank you. > Regards, > Hitoshi Kaneko > E-mail: Hitoshi Kaneko <[email protected]> -----Original Message----- From: [email protected] <[email protected]> On Behalf Of Luis Gomez Sent: Friday, February 21, 2020 1:13 PM To: Hitoshi Kaneko <[email protected]> Cc: netconf-dev <[email protected]>; [email protected]; [email protected] Subject: Re: [netconf-dev] About setting VxLAN through ODL/Netconf Hi Hitoshi, Unfortunately I do not know the details for VxLAN configuration in Juniper. However if you configure VxLAN via CLI and after you receive the router configuration via REST: GET http://{{controller}}:8181/restconf/config/network-topology:network-topology/topology/topology-netconf/node/VMX-01/yang-ext:mount/ You should be able to figure out the URL and body you are asking for. If not please send the output of the above request and I will provide my best guess. BR/Luis > On Feb 20, 2020, at 8:05 PM, Hitoshi Kaneko <[email protected]> > wrote: > > Luis Gomez-san, > CC: opendaylight personnel > > This is Hitoshi in NTT labs. > > Did you have a chance to see the below email I sent you day after yesterday ? > > I hope to know whether ODL implement control over VxLAN. > > I'll happy to receive information about it, anything is fine. > > > Thank you. > Regards, > Hitoshi Kaneko > E-mail: Hitoshi Kaneko <[email protected]> > > -----Original Message----- > From: Hitoshi Kaneko <[email protected]> > Sent: Wednesday, February 19, 2020 7:09 PM > To: 'Luis Gomez' <[email protected]> > Cc: '[email protected]' <[email protected]> > Subject: About setting VxLAN through ODL/Netconf > > Luis Gomez-san, > > This is Hitoshi in NTT labs. > > Thank you for helping me about how to set NIC-IP-address to vMX from ODL > other day recently at below mail. > > Now, I want to evaluate VxLAN-control from ODL/Netconf to JUNOS(vMX). > > I have been able to set VxLAN to vMX from command-line. > > I'm very happy if you advise me about it, for example, giving related URLs, > anything is fine. > > Thank you. > Regards, > Hitoshi Kaneko > E-mail: Hitoshi Kaneko <[email protected]> > > -----Original Message----- > From: [email protected] <[email protected]> > On Behalf Of Luis Gomez > Sent: Monday, November 4, 2019 4:50 AM > To: Hitoshi Kaneko <[email protected]> > Cc: [email protected] > Subject: Re: [netconf-dev] about setting NIC-IP-address through ODL/Netconf > > Hi Hitoshi, > > See my comments in-line: > > > > On Oct 31, 2019, at 1:45 AM, Hitoshi Kaneko > <[email protected] <mailto:[email protected]> > > wrote: > > Luis Gomez-san, > > This is Hitoshi. > Thank you for your answer and kindness. > > > > enough CPU (4 CPUs) and RAM (8GB) and you setup the > java heap to -Xmx8G. > > > > I show my machine conditions with below LOGs. > Is it enough? > > > > It seems very sufficient, so I do not think the problem you are hitting is > due to the controller system resources. > > > As the problem of ‘not responding in several minutes’ has persisted > with above machine conditions, > I have tried two actions below. > > 1) I have demanded Juniper, Ltd to send me Junos 18.1.(now, 17.2R1) > 2) I have been increasing yang schema files that is specified when node > is created, > because I have specified only 2 schema files till now, as there are > many schema files for Junos 17.2R1. > > > > > No comments, just try with updated JUNOS and let us know if that works better > for you. > > > Please advise me if you have comments above actions. > > > Thank you. > Regards, > Hitoshi Kaneko > E-mail: Hitoshi Kaneko <[email protected] > <mailto:[email protected]> > > > > --------------- LOGs --------------------------- > 【CPU cores, etc.】 > kaneko@kaneko-PowerEdge-T130-3:~$ cat /proc/cpuinfo | grep "cpu cores" > cpu cores : 4 > cpu cores : 4 > cpu cores : 4 > cpu cores : 4 > cpu cores : 4 > cpu cores : 4 > cpu cores : 4 > cpu cores : 4 > kaneko@kaneko-PowerEdge-T130-3:~$ cat /proc/cpuinfo | grep "physical id" > physical id : 0 > physical id : 0 > physical id : 0 > physical id : 0 > physical id : 0 > physical id : 0 > physical id : 0 > physical id : 0 > kaneko@kaneko-PowerEdge-T130-3:~$ cat /proc/cpuinfo | grep processor > processor : 0 > processor : 1 > processor : 2 > processor : 3 > processor : 4 > processor : 5 > processor : 6 > processor : 7 > kaneko@kaneko-PowerEdge-T130-3:~$ > > > > >
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#8531): https://lists.opendaylight.org/g/Discuss/message/8531 Mute This Topic: https://lists.opendaylight.org/mt/71446062/21656 Group Owner: [email protected] Unsubscribe: https://lists.opendaylight.org/g/Discuss/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
