Re: the possibility of it being a windows problem: 100% impossible. I am running Slimserver on a Linux Fedora Core 3 box, and the only windows box in the house is a laptop that hasn't been used in at least the past week. The last time the laptop was used, I connected wirelessly to the same router the SB2 connects to, browsed a bit, and shut down the laptop, and all the while the SB2 was streaming radioparadise over the 'net.
I do have a bit of an update, though: the SB2 sits in my living room, and the router (Linksys WRT54G) is in the basement, one floor and one wall away. I happened to check the wireless signal strength on the SB2, and found it fluctuating between 60% and 70%. While I was doing this, it black screened on me. Had to go through the setup again. I also upgraded my server software from 6.0.1 to 6.0.2 the other night, and the SB2 firmware from 9 to 11 (as reported on the SB2 itself). Since it blackscreened again anyway, i'm thinking the problem is something other than the software or server though... Maybe I just have poor signal strength in that location. I will check next time and see if I can bypass the setup by doing "down arrow" "finish setup" when it turns back on. In the meantime, i'm open to further suggestions. -Rob PS - Re: the animated avatar: I spent a long time finding an avatar that I like, and I use the same one on 15 different forums. I'm not changing it because you're a technological luddite. Turn off images in your browser if you don't want to see them. -- Snowflake _______________________________________________ Discuss mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/discuss
