It sounds like the SC7 system supports WOL and is correctly configured Is your SB3 connected using wired or wireless ethernet? Is you server connected using wired or wireless ethernet? If one is wired and the other is wireless then the wireless bridge could be the cause of the issue.
With the server off, power on the SB3 and press the left arrow button on the remote. Scroll through the "Squeezebox Setup" menu until you find "Current settings" (option 2 of 4, in my case). Within this menu you can view the value of the "SqueezeCenter MAC address". Confirm that this value matches the actual MAC address of the SC7 system. If it does not, it may match the MAC address of your wireless bridge. In this case you can edit the value and see if it sends the magic packet to the correct MAC address (I've no idea whether it is stored or not as this never been a problem for me). If none of this is applicable to you, try connecting the PC and SB3 together directly using a patch cord and see if you can wake the PC using the SB3 (will need to assign IP addresses to both manually). This will isolate any network issues. -- syburgh ------------------------------------------------------------------------ syburgh's Profile: http://forums.slimdevices.com/member.php?userid=14239 View this thread: http://forums.slimdevices.com/showthread.php?t=51288 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/discuss
