Thanks dude that was the problem...the SB3 had the wrong MAC of the SC server and once I changed that all was good.
Thanks syburgh;331230 Wrote: > It sounds like the SC7 system supports WOL and is correctly configured > > Is your SB3 connected using wired or wireless ethernet? > Is you server connected using wired or wireless ethernet? > If one is wired and the other is wireless then the wireless bridge > could be the cause of the issue. > > With the server off, power on the SB3 and press the left arrow button > on the remote. Scroll through the "Squeezebox Setup" menu until you > find "Current settings" (option 2 of 4, in my case). Within this menu > you can view the value of the "SqueezeCenter MAC address". Confirm that > this value matches the actual MAC address of the SC7 system. If it does > not, it may match the MAC address of your wireless bridge. In this case > you can edit the value and see if it sends the magic packet to the > correct MAC address (I've no idea whether it is stored or not as this > never been a problem for me). > > If none of this is applicable to you, try connecting the PC and SB3 > together directly using a patch cord and see if you can wake the PC > using the SB3 (will need to assign IP addresses to both manually). This > will isolate any network issues. -- Govnah ------------------------------------------------------------------------ Govnah's Profile: http://forums.slimdevices.com/member.php?userid=2719 View this thread: http://forums.slimdevices.com/showthread.php?t=51288 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/discuss
