seanadams;382407 Wrote: > I don't know off the top of my head where it might be.. the thing is, > reprogramming it is not a simple affair and it's very unlikely that it > would help anyway. The JTAG header is a not a standard footprint so > it's not as simple as just plugging in a cable, and what you're > describing sounds like an IC failure, not a corrupted flash of some > kind. I'm afraid there's not much hope for it at this point, unless > you can see a physical failure like a loose or shorted pin.
I have done some more testing incl multiple reload of the 2.3 firmware. Seems like i have a consistent pattern: The unit is working ok after power up as long as I don't use the remote control but use the web interface to turn on the unit and select music to play. As soon as I press any button on the remote, the slimp3 halts for maybe 15 seconds, and then continues to play, but with grabled sound, sound a bit like it is skipping packets but it does so for hours. In addition the volume seems to be maxed. When the device flips to this 'garbled' mode it stays like that until the unit is powered down (ie stand-by, not physically disconnected from mains). If I then turn the device on again with the web-interface, it works ok again - until the next keypress on the remote control ... Unless anyone have some bright ideas I guess I have to chuck the remote away ;-) -- roboele ------------------------------------------------------------------------ roboele's Profile: http://forums.slimdevices.com/member.php?userid=22615 View this thread: http://forums.slimdevices.com/showthread.php?t=57886 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/discuss
