This will be a similar setup to my own, so in theory ... On the new router:
1. Configure the WAN side to use DHCP. It won't really matter as there's nothing going to be connected there but that's what I did on mine. 2. Give it a local static IP address in the same IP range as your existing network but not one within the existing routers DHCP range. 3. Turn off DHCP. 4. Configure wireless networking with a different SSID AND different channel to the existing router. 5. If it has a choice of operating mode between router and gateway, as my Linksys has, set it to router. 6. Connect an Ethernet cable from a LAN port to a LAN port on your existing router. The cable may need to be crossed; it depends on whether either router is auto sensing. On the SB: 1. Configure wireless access to the new router's SSID. That, I think, should do it. -- Mick Seymour ------------------------------------------------------------------------ Mick Seymour's Profile: http://forums.slimdevices.com/member.php?userid=21137 View this thread: http://forums.slimdevices.com/showthread.php?t=62467 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/discuss
