ghostrider;457392 Wrote: 
> There are still those of us that occasionally utilize a turntable and
> require a "true" preamp functionality as well as tone controls. Also
> require analog inputs which the TP does not provide. You are in effect
> using the TP as a digital switch, maybe this is just an issue of
> nomenclature.

The thing is: The Transporter was sold specifically for use without a
preamp. In fact, it includes attenuation jumpers on the motherboard so
that it can be configured for the proper output level of an amplifier it
connects directly to. 

I quote the transporter manual, page 24, where this is encouraged:

> 
> Analog Output Attenuation (For Qualified Personnel Only)
> Transporter has a set of internal attenuators that can be used to
> reduce the voltage level of the unbalanced analog outputs. If you are
> connecting Transporter directly to an amplifier that does not have an
> input gain control, you may need to change the attenuation level.
> To change the attenuation level, you’ll need to remove the cover of
> your Transporter and move a pair of jumpers.
> You’ll need a 1/16” hex key to remove the screws holding the cover on.
> To do this:
> 1. Unplug Transporter from the AC power.
> 2. Using a 1/16” hex key, remove four screws on each side of
> Transporter that hold the top in place. (You do not need to remove any
> of the screws on the bottom of Transporter.)
> 3. Slide the top off towards the back of the unit.
> 4. Near the unbalanced analog outputs, you’ll see a set of jumpers,
> like in the picture below:
> As it comes from the factory, Transporter is set for 0 dB attenuation.
> To adjust the attenuation, gently pull the black jumper conductors at
> the 0 dB position and move them to the position corresponding to the
> attenuation level you’d like. Choices include -10dB, -20dB and -30dB.
> 5. Slide the top cover back on and replace the eight hex screws.
> 

In this configuration, the only volume knob available is that on the
transporter. Perhaps the person who designed and wrote this no longer
works there, but please don't deny your roots. :)


-- 
chroma
------------------------------------------------------------------------
chroma's Profile: http://forums.slimdevices.com/member.php?userid=22010
View this thread: http://forums.slimdevices.com/showthread.php?t=67747

_______________________________________________
discuss mailing list
[email protected]
http://lists.slimdevices.com/mailman/listinfo/discuss

Reply via email to