chrisla Wrote: > Ethernet at 100Mbs is rated at hundreds of meters. Only a single 100 meters, if I recall correctly. Or approximately 300 feet. I looked into it once for my factory. That goes all the way from the front office to the back of my factory just fine.
It's actually 100 meters between switches or hubs, but only 2 hubs maximum for any path traversal. So check if you have only hubs in your house and count how many your signal is going through. The limits are more relaxed for 10baseT, I think 4 or 5 hubs, so if 10 works and 100 doesn't, check how many hubs you're sending your signal through. If it's more than 2, replace the central one with a switch if possible. That's a better solution than putting up with 10baseT (or replacing wire already in the wall). Is the wire in the wall CAT5? If not, it's not rated for 100BaseT anyways. -- Michaelwagner _______________________________________________ Discuss mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/discuss
