lukadad;603552 Wrote: > Just browsed the forum and I did not find anyone with the same problem. > Hope you guys/girls can help : > > succesfully installed a squeezebox receiver (without controller) on my > system,using the UDAP - tool. Using a Synology DS209 to run Squeezebox > Server. > > I'm using an archos 101IT with Squeeze commander to control everything. > > > Since the beginning i noticed i had to power on (plugging it) the > receiver for the squeezbox server to notice it. I've also got a > Squeezebox Radio and that one is always visible. The receiver only once > I plug it in. > > The receiver is wired connected to the NAS. > Is there a 'standby mode' i have to select? Once I powered it of using > the remote function, I can power it back on, but not p.e. the day > after. > > At first I thought it was because my NAS also powered off during the > night, but I changed it to never power of. But still my receiver loses > connection with the server after a long period of non-use. > > Any thoughts?
I think i've fixed my problem. Started from a factory reset and followed the setup procedure once more. Now I've looked more carefully at the fields of the receiver and changed the values I needed. I think I previously forgot to put the lan-ip-mode to static (0). Now I also saved the ip parameters. I restarted my NAS and now my receiver was immediately visible in the squeezebox server. Tomorrow morning will be the final test (after a complete shutdown of the NAS). -- lukadad ------------------------------------------------------------------------ lukadad's Profile: http://forums.slimdevices.com/member.php?userid=43242 View this thread: http://forums.slimdevices.com/showthread.php?t=57861 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/discuss
