bundee1;677180 Wrote: > Hello I got this to work yesterday. My sb3 is connected via a wireless > bridge. After using your program yesterday the server found the player > and I got it to work but for some reason my SB3 defaults back to a > wireless connection when the player is discovered via SqueezeConfig. > This morning I didnt check the settings before reconnecting with your > app and set it as wireless. Now squeezeconfig cant find the player even > though its plugged in. > > Any suggestions?
First, some clarifications: Your SB3 is connected via LAN (wired) to a wireless bridge. The bridge is a separate device, i.e. you do not use the bridge feature of the SB3, right? SqueezeConfig will never change the settings on its own. If you select a player in SqueezeConfig, it will ask you if it should use the Wifi values of your phone. If you select NO, you will see the unaltered settings of your SB3. (At least, that's the expected behaviour. If it behaves differently, it's a bug.) Have you tried a factory reset of the SB3? The SB3 can only be found by SqueezeConfig if it is in Setup mode, e.g. after a factory reset. Press-Hold the "+" button on the SB3 remote while plugging in the power cable. This should factory reset the SB3 and it should be found by SqueezeConfig (the SB3 needs to be connected via LAN cable in this case!). But why exactly do you need to re-configure your SB3 every day? Does it lose its connection to the server? If yes: At which point does it lose the connection? After a server restart? You may want to try to set a static IP for the SB3 (using SqueezeConfig). This often helps a lot. BTW: If the SB3 loses its connection to the server after a server restart, it's often enough to *restart* the SB3 to reconnect. In SqueezeConfig, you can long-press on a player and select "Reset". This will restart the SB3, but keep the current values. If you are using SqueezeCommander, you can also reconnect an unconnected SB3 from within SqueezeCommander, i.e. you do not need to use SqueezeConfig in this case. SqueezeConfig is only needed for the initial setup. -- flattermann Christian Home of 'SqueezeCommander' (http://www.squeezecommander.com) - The SqueezeBox Remote Control App for Android ------------------------------------------------------------------------ flattermann's Profile: http://forums.slimdevices.com/member.php?userid=33169 View this thread: http://forums.slimdevices.com/showthread.php?t=76584 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/discuss
