> 1. The manual and the SB2 keeps referring to the > encryption as "WPA Personal". I'm using WPA-TKIP. > I assume there's no difference? The passphrase > I'm entering is not in hex, and the SB2 happily > accepted it. WPA-TKIP for your router would be WPA Personal. Passphrases don't have to be hex. Just make sure the letter case matches. > > 2. Should I change channels on my router? You might need to later; depends on how things work out. > 3. When entering SSID, I have a suspicion SB2 > thinks there are some trailing spaces in the name. > There aren't, but I can't seem to check or to > delete them in the SB2. Is this a problem? Try enabling SSID broadcast on your router first, and reset SB2 and let if find the broadcast'd SSID. If that works, you can later disable broadcasting of the SSID. > I am in an RF-noisy environment, less than 1 km > away from a powerful radio antenna and in range of > 3-4 other wireless networks. Wi-fi devices can > connect to my router at "54 Mbps" but real-time > speed is limited to 13 Mbps because of this. > Should still be enough to connect, and more than > enough bandwidth even for lossless (the .flacs I > have are less than 1 Mbps). Once you get connected, you can try various channels to determine best settings. You might even be able to work with your neighbors to ensure you channels do not overlap or conflict.
-- MrC _______________________________________________ Discuss mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/discuss
