Are you sure you're getting the factory reset on the receiver? There are 2 resets, the first is just a network reset which I've found to be next to useless. To do the full factory reset on the receiver you must press and hold the front button on the receiver for about 20 - 30 seconds. You should notice the LED go to a fast red blink while you're holding the button and when you release it the LED should go to a solid red. You can tell that it has been fully factory reset from the controller when you go to select player, the receiver should be seen by it's MAC address rather than the name you gave it. I've had my best luck by doing a factory reset on both the receiver and controller. I did have a issue one time where the receiver wouldn't go any further than blue LED (got IP from router, but refused to connect to my Squeezebox server). When than happened I ended up having to use Net::UDAP to put my server IP and name in the receiver. I documented that over in the Duet section of the board.
------------------------------------------------------------------------ w3wilkes's Profile: http://forums.slimdevices.com/member.php?userid=22973 View this thread: http://forums.slimdevices.com/showthread.php?t=96648 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/discuss
