This project looks like a lot of fun! I currently have a Touch, but my amps are DIY and it would be cool to have the source DIY too.
I've ordered a Wandboard Dual from Future Electronics, they seemed to have the best price in the US. There were a few hoops to go through like filling out an export form and a warm call from the sales rep, but overall not bad. I know these first versions won't claim to have any user interface, but I figured I'd throw a suggestion out there. I'm planning to use an OLED display which has a SPI interface, and the i.MX6 has built in SPI with even a Linux driver in mainline. John, I'm not sure if you're keeping a list of people's "wants" but it would be nice to have a small 0.1" unpopulated header with the SPI interface (both chip selects) along with 3.3V. This would allow a relatively simple interface to a number of display devices. For those that are interested in the user interface I have in mind, here's a couple things I've been looking at: http://www.aliexpress.com/item/5-6-inch-Green-256x64-oled-display-oled-module/567321307.html http://dx.com/p/ditter-m5-wireless-6-axis-optical-2400dpi-air-mouse-black-2-x-aaa-200908 I'd like to come up with a UI similar to the Boom. I have ported Squeezeslave to the "empeg" using the Boom interface and I quite enjoy it. You can see my work here: http://forums.slimdevices.com/showthread.php?89844-Vanputer ------------------------------------------------------------------------ rpress's Profile: http://forums.slimdevices.com/member.php?userid=31544 View this thread: http://forums.slimdevices.com/showthread.php?t=97881 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/discuss
