JohnSwenson wrote: > Currently the hardware for CSP1 has three DACs, one feeds the RCAs, one > XLR+ and one XLR-. The same data gets sent to the RCA and XLR+ DACs, > there is a hardware inversion on the way to the XLR- DAC. There is no > provision for a user selectable inversion on the DATA stream. It COULD > be done, but the board is already designed. Then there is how the user > makes the selection. You can put a switch on the box itself. Or it can > come from software. If it's software we have to take another signal off > the processor into the carrier board. It certainly can be done, but it's > again a change to the current implementation. > > Then the software has to be written to flip that output pin of the > processor. > > It would probably be easier to implement it in software. But that is up > to Triode and JackOfAll. > > The off the shelf approach is to make an adapter to take single ended > signals off the XLRs, selects either the + or - outputs. > > John S.
Thanks for the explaination , interesting aproach differential DAC's and for this price very good indeed . -------------------------------------------------------------------- Main hifi: Touch + CIA PS +MeridianG68J MeridianHD621 MeridianG98DH 2 x MeridianDSP5200 MeridianDSP5200HC 2 xMeridianDSP3100 +Rel Stadium 3 sub. Bedroom/Office: Boom Kitchen: Touch + powered Fostex PM0.4 Misc use: Radio (with battery) iPad1 with iPengHD & SqueezePad (in storage SB3, reciever ,controller ) server HP proliant micro server N36L with ClearOS Linux http://people.xiph.org/~xiphmont/demo/neil-young.html ------------------------------------------------------------------------ Mnyb's Profile: http://forums.slimdevices.com/member.php?userid=4143 View this thread: http://forums.slimdevices.com/showthread.php?t=97881 _______________________________________________ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
