Since you have tried the setup as you have had it before and it doesn't work, I think you need to try doing something different than what it was before.
What I would do is assign a static IP address (outside of the DHCP pool of course) and ping the TP from a computer plugged in to the same switch. So you have computer -> switch -> TP. The TP should be on the same subnet as the computer. If the TP does not respond to a ping in this configuration, something is really wrong. At this point try swapping out all the variables, try different cables, different ports on the switch, even a different switch if you have one. If none of THAT works, then assign a static address to the computer and try connecting direct to the TP without a switch, just one cable: computer -> TP. Note that this is not trying to connect to LMS, just trying to get a ping response from the TP If THAT doesn't work you have something wrong with the TP. Since it seems like you have done all the usual software resets at this point. It it still won't talk to anything else I'm out of ideas. John S. ------------------------------------------------------------------------ JohnSwenson's Profile: http://forums.slimdevices.com/member.php?userid=5974 View this thread: http://forums.slimdevices.com/showthread.php?t=101400 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/discuss
