ralphy wrote: > Well, I finally replaced the C16 and C20 capacitors in my original > slimdevices sb3, back when you could by them without the wireless card. > > If I had not already ordered the caps, I would have ordered 'these > non-polarity ones' > (http://forums.slimdevices.com/showthread.php?71914-SB3-volume-output-lower-on-left-than-right-channel&p=851444&viewfull=1#post851444). > > Opening the sb3 is quite easy, you just need a Torx 10 (T10) > screwdriver. > > http://lowtek.ca/roo/2011/squeezebox-classic-repair/ > > Remove the 2 x T10 screws from the back and then remove the front face > plate. > > With the face plate removed, unscrew the 4 x T10 screws from the front > and slide out the "guts". It's one piece. > > I cut the capacitor leads down close to the size of the original surface > mount caps. > All back together now and both the analog out and headphone jack are > working great!
Another C16 and C20 success here, thanks for posting the detailed info.....[emoji851] ------------------------------------------------------------------------ wl1's Profile: http://forums.slimdevices.com/member.php?userid=9842 View this thread: http://forums.slimdevices.com/showthread.php?t=103213 _______________________________________________ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss