philippe_44 wrote: > As other said, there are 3 options > > 1/ External power supply ==> you tried PSU from other SB and it still > does not work, so excluded > 2/ WiFi card ==> remove the 2 screws on the back, that frees up the > front cover. Then you have 4 other screws to release the PCB and in the > back of it, you have the WiFi card that can be removed by just pulling > the 2 small levers right/left. Don't bother removing the antenna cables, > just connect an ethernet cable and the power and see if it works > 3/ If it fails on ethernet, then 99% chance this is the electrolytic > capacitors inside that have failed. It's a very typical failure that > manifests itself by this reboot problem. I just fixed 2 SB3 recently by > changing them all. You should then contact @JoeMcu2009 if you are in EU > as he can fix that for you if you want to. > > Just a last "request": if you don't want to fix it, don't throw it away, > others will be happy to get a non-working SB3 and either fix it or use > it for parts
I just tried plugging it into an ethernet cable and after a few minutes it rebooted. So, it doesn't appear to be the power supply or the wireless card. ------------------------------------------------------------------------ tdehan's Profile: http://forums.slimdevices.com/member.php?userid=65180 View this thread: http://forums.slimdevices.com/showthread.php?t=109765 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/discuss
