mrw wrote: > As mine was 'repaired' by acquiring a replacement PSU, I don't have any > further suggestion ! But there have been recent posts on the forum > pointing to some expertise. > > Long shot: I know you verified with two other apparently OK PSUs, but > might they be a bit old in the tooth ? If you can get access to an > adjustable bench top PSU you might carefully feed it from that and see > if the problem persists. I set a maximum current limit before attaching > the bench top PSU. > > I recall that the SB took up to about 0.8A at some point during its > start up, and did not fully power up with input voltage much less than > 5V. In reality I probably started with a maximum current of, say, 0.25A > to start with, and a lower voltage, and worked my way up to successful > operation. So a new PSU solved it. > > Caution: I seem to recall that there is power to the display at a > relatively high voltage, more than 50V, so take appropriate precautions > before you poke around or handle it with the covers off.
I don't believe the issue is the PSU. I have 4 other working Squeezeboxes and have tried the failed unit on all 4 power supplies. ------------------------------------------------------------------------ tdehan's Profile: http://forums.slimdevices.com/member.php?userid=65180 View this thread: http://forums.slimdevices.com/showthread.php?t=109765 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/discuss
