raintonr;160376 Wrote: > Absolutely. Ah... erm... or so I thought!
OK, so this gets a bit weird... I was originally running an old 6.5beta of Slimserver when beginning to set this up. From memory this was dated a couple weeks before the official 6.5 release. SB2s were on firmware 62. I am 100% sure at this point that I was able to follow the instructions in the manual: 2. Press and hold Left to get to setup. 3. Go up to networking 4. Choose your region 5. You should be presented with bridging option - yes I was, turned it on. After this, the bridge didn't work, so figured I should get the latest Slimserver (not a beta - took official 6.5.0 - 9916 - Linux - EN - utf8) which upgraded SB2 firmware to 64. Upon SB2 boot was able to hit Left, goto 'current settings' and yes, bridge wireless was still on. Still not working decided to factory reset. Set up wireless networking in the same way, but no - this time there was no question to ask to turn bridging on. Player connected to Server fine, press Left, go check 'current settings' - lo and behold, bridge if _OFF_!! Go back to network setup and after country, no, there is no option for bridging - it's disappeared!!! What on earth? Where has this option gone? Notice it is still listed in 'current settings' but there's no way to modify from there. Gone from network setup. This is the same story whether a cable is connected or not upon boot and network setup. Although I do notice when the SB2 connects to wireless LAN, whatever is connected to the wired port reports it's been disconnected and re-connected in quick succession. I'm stumped, sorry, but what's the go? -- raintonr ------------------------------------------------------------------------ raintonr's Profile: http://forums.slimdevices.com/member.php?userid=1023 View this thread: http://forums.slimdevices.com/showthread.php?t=30375 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/discuss
