Actually, before we go any further you need to eliminate the wi-fi completely from being the problem. Bear in mind that wi-fi is about as flaky as technology gets right now!
Can you wire the SB directly to the server and see if it works fine - just as a test. If this works then the wi-fi (or router) IS the problem. If it doesn't, then we need to look at the server PC or the overall TCP IP network config. Can you check the MAC address of the SB (the one it thinks it has now - NOT the one printed on the SB itself) and make sure it is not the same as anything else on your network? -- Phil Leigh You want to see the signal path BEFORE it gets onto a CD/vinyl...it ain't what you'd call minimal...SB3+Stontronics PSU - Altmann JISCO/UPCI - TACT RCS 2.2X with Good Vibrations S/W - MF X-DAC V3/X-PSU/X-10 buffer (Audiocomm full mods)- Linn 5103 - Linn Aktiv 5.1 system (6x LK140's, ESPEK/TRIKAN/KATAN/SEIZMIK 10.5), Townsend Supertweeters, Kimber & Chord cables ------------------------------------------------------------------------ Phil Leigh's Profile: http://forums.slimdevices.com/member.php?userid=85 View this thread: http://forums.slimdevices.com/showthread.php?t=43298 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/discuss
