On 19/02/2008, spc337 <[EMAIL PROTECTED]> wrote: > > I've switched to a hardwire connection. No improvement. In fact, the > SB3 wasn't even responsive to the power button. I've just downgraded > to 6.5.4 to see if that helps. > > I've watched the CPU performance and to see if the Anti-virus was > kicking off but CPU is idle 90+% an the antivirus isn't doing a scan. > > The SB3 is completely unresponsive to requests. If I power it down, > the it runs through the setup as normal and once connected it slows to > a crawl and stops responding. The RSS feed is working but the > scrolling is jumpy and excessively slow, but at least it is the correct > text. > > Thoughts?
I've experienced the same symptoms, which were caused by the server clock being too fast. As I understand it, the server disregards events that are older than 3 seconds or so. At first I thought it was a performance issue, but the CPU use was about 5% and when I controlled the SB3 from the web interface, it responded immediately. Have you tried to control the SB3 from the web interface when these lockups occur? I run SC7 on a ubuntu guest in a VMware server running on AMD64, so things are quite different from your setup. /grydholt _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/discuss
