Two ways. 1. Use the ISP router to talk only to the Linksys. Connect the Linksys wan port to one of the ISP output ports. (Configure the Linksys to a different ip address range - this may not be necessary - I'm not sure). Turn off the ISP wireless or use a different SSID (and channel if you like). Then have everything in the house talk to the Linksys.
2. Use the Linksys as an access point only. Turn off dhcp etc in the Linksys. Give it an address in the ISP range (e.g. 192.168.0.2). Set its channel and SSID to match the ISP. Then connect on of the Linksys lan ports, NOT the wan part, to an ISP router lan port. If you do this with a long cable, and depending on your situtation, you can place the Linksys near the action. -- Millwood ------------------------------------------------------------------------ Millwood's Profile: http://forums.slimdevices.com/member.php?userid=3600 View this thread: http://forums.slimdevices.com/showthread.php?t=45855 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/discuss
