So I have the SpeedTouch (a poor router) with DHCP enabled plugged into the telephone line, and the LinkSys LAN socket plugged into the SpeedTouch LAN socket, with DHCP server disabled on the LinkSys. The LinkSys and SpeedTouch have different SSIDs and channels, but the same WEP password.
My desktop, running SlimServer, is hard wired into the LinkSys, and works. My Vista LapTop will happily connect to either the SpeedTouch or the LinkSys. My SB3 happily connects to the SpeedTouch. However the SB3 sees the LinkSys, but will not automatically obtain an IP address from the LinkSys. I want the SB3 to run form the LinkSys since this is the better router, and I continue to have drop out problems with the SpeedTouch (esp when running 2 sync'd SB3s). Any idea why everything else runs from the LinkSys but not the SB3? I have 2 SB3s and they are the same. -- rbl ------------------------------------------------------------------------ rbl's Profile: http://forums.slimdevices.com/member.php?userid=4517 View this thread: http://forums.slimdevices.com/showthread.php?t=45855 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/discuss
