After about 22 months the SB3 display is dead. Apart from that, the device is completely functional through the web interface or the cli. I tried the Brightness button, it didn't help. Since I still use it every day, sending it for repair is not that simple.
1. If I reset the unit, will I be able to reconfigure it (give an IPAdress etc.), through the web interface or any other way with the display blank? 2. I was about to open the case to check the display contacts. But then I read in an other thread that these contacts are fixed and so not likely to be loose. I also wanted to disable the wireless card (I only use LAN), but I found no indication that it can bring the display back. I'm afraid of a reset that will not allow me to reconfigure. Anyone had a similar situation (workable unit with a bad display)? Is it worth to try to fix it myself? thanks in advance pulp -- pulp_136 ------------------------------------------------------------------------ pulp_136's Profile: http://forums.slimdevices.com/member.php?userid=3274 View this thread: http://forums.slimdevices.com/showthread.php?t=47015 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/discuss
