radish;311322 Wrote: > The discovery protocol is documented here: > http://wiki.slimdevices.com/index.php/SLIMP3ClientProtocol > > It's basically a broadcast discover packet followed by a unicast > response from the server containing IP & port. If the same problem > occurs when connected via the wired interface I'd run a sniffer and > look at this exchange. It's hard to see how a simple switch could > mangle a packet in that way!
Check the MAC address of the SB matches the label on the back. If different, change it to match the label. Make sure you have your gateway and DNS settings in the SB pointing at the router 172.16.16.1 -- Phil Leigh You want to see the signal path BEFORE it gets onto a CD/vinyl...it ain't what you'd call minimal...SB3+Stontronics PSU - Altmann JISCO/UPCI - TACT RCS 2.2X with Good Vibrations S/W - MF X-DAC V3/X-PSU/X-10 buffer (Audiocomm full mods)- Linn 5103 - Linn Aktiv 5.1 system (6x LK140's, ESPEK/TRIKAN/KATAN/SEIZMIK 10.5), Townsend Supertweeters, Kimber & Chord cables ------------------------------------------------------------------------ Phil Leigh's Profile: http://forums.slimdevices.com/member.php?userid=85 View this thread: http://forums.slimdevices.com/showthread.php?t=48810 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/discuss
