Hey Lew,
My experience with Pro Tools III systems is extremely limited. I used to use
it back in college but that was ages ago. I would imagine version 5
supported it up to 5.1.3. Other than that, I've never used the 800 series
interfaces. I came into the whole thing first, through an AudioMedia III
card which was LE and jumped straight to the HD3 system and never even
touched the Mix stuff personally. Rick Boggs has loads more experience with
them and certainly Vinny and Chuck have Mix systems but, then again, the
interfaces they have are 888, not 882.
HTH
----- Original Message -----
From: "Lewis Brock" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Monday, April 07, 2008 12:34 PM
Subject: message for slau.
hi jerry its lew
sorry couldnt find your off list email so posting on list.
I have now a G3 beige system which needs a little attention but it has
Pro Tools TDM III version 5 software with the mix core card and mix farm
card. have you used this old system? if so what is the maximum version
that could be upgraded to with outspoken 9 I ask as I'm wondering if I
can get any updates or upgrades still from digidesign or am I on a lost
road? if you could help somehow I'd really appreciate it. incidentally
audio interface for it is the rackmount 882/20/I.O
its all kitted out. just needs a bit of a clean up and a part replacing.
its that daft DB15 to VGA connector and I cant find one for love nor
money
if you could somehow guide me or point me in the right direction that
would be great. Someone is passing on a G3 blue and white and my thoughts
are to transfer the two cards and pro tools to the blue and white but I'm
aware of the license auth disk. so thats another thing to look at
lew
Mr. Lewis Brock
Totally blind musician and composer of 21st century synth orchestral
music
Phone: +44 07857 352828
E-Mail: [EMAIL PROTECTED]
Skype: lewisjbrock
